Thread: DIY car ramps
View Single Post
Old May 3, 2017 | 10:55 PM
  #7 (permalink)  
onehundred80's Avatar
onehundred80
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 648
From: Ontario
Default Re: DIY car ramps
Originally Posted by blasco403
Hey 180,

I forgot to mention that I also put some rubber on the bottom of each so they would not slide around when driving onto them on my smooth concrete floor in my garage..

Good luck..
I intend to use three 2 x10s x 10' cut into 5',4', 3', 2', and 1' lengths. The highest end will have each peice staggered by 1" to provide extra stability against tipping up and the other ends cut at 45 degrees or so.
 
Last edited by onehundred80; May 3, 2017 at 11:02 PM.
Reply
0