Thread: Starter Bolt Size and type.
View Single Post
Old Jun 9, 2017 | 04:52 PM
  #4 (permalink)  
Toolman's Avatar
Toolman
Senior Member
Joined: Feb 2009
Posts: 1,002
Likes: 55
From: Philadelphia, PA
Default Re: Starter Bolt Size and type.
Originally Posted by ala_xfire
from Pelican Parts :

There are two E14 Torx bolts holding the starter to the bell housing.
( The proper torque is 31 ft/lbs )

Here's a decent set :
https://www.amazon.com/Vector-Tools-...words=torx+e14
Very commendable response! Very fast within 10 minutes, detailed specs, and were to get the tools. Great job!
 
Reply
0