Starter Bolt Size and type.
Thread Starter
Joined: May 2017
Posts: 16
Likes: 0
From: NW Georgia
Starter Bolt Size and type.
My trans was recently rebuilt on my 05 SRT6 and the starter wasn't tightened.
It sort of looks like some sort of tork socket.
Anyone know what size and what it's called ?
Thanks. And I hope I posted in the right place.
It sort of looks like some sort of tork socket.
Anyone know what size and what it's called ?
Thanks. And I hope I posted in the right place.
Senior Member
Joined: Dec 2010
Posts: 12,780
Likes: 184
From: Lineville, AL
Re: Starter Bolt Size and type.
There are two E14 Torx bolts holding the starter to the bell housing.
( The proper torque is 31 ft/lbs )
Here's a decent set :
Last edited by ala_xfire; Jun 9, 2017 at 11:51 AM.
Senior Member
Joined: Feb 2009
Posts: 1,002
Likes: 55
From: Philadelphia, PA
Re: Starter Bolt Size and type.
from Pelican Parts :
There are two E14 Torx bolts holding the starter to the bell housing.
( The proper torque is 31 ft/lbs )
Here's a decent set :
https://www.amazon.com/Vector-Tools-...words=torx+e14
There are two E14 Torx bolts holding the starter to the bell housing.
( The proper torque is 31 ft/lbs )
Here's a decent set :
https://www.amazon.com/Vector-Tools-...words=torx+e14
Senior Member
Joined: Dec 2010
Posts: 12,780
Likes: 184
From: Lineville, AL
Re: Starter Bolt Size and type.
I serve at the forum's pleasure.
