I've seen several posts highlighting Cracks on the SRT Fixed Wing Uprights. based upon previous threads this appears to be limited to the Roadster.

I've been fortunate enough to locate an SRT-6 Trunk lid equipped with Fixed Wing. upon arrival and inspection, I've discovered the dreaded cracks in the same location as those in all of the images I have seen.

Crap

Although I've seen posts about the problem, I have not been able to locate one that describes any sort of repair.

I'm going to repair mine. I'll post steps and images along the way. I'll also update it a few months on as to how the wing is holding after the repair

Products I'll be using (Images attached)
-Speed grip Urethane Structural 2 part Adhesive
-Carbon Fiber
-West System 105 Epoxy resin
-West System 206 Hardener
-Icing Polyester Finishing Putty

I'll update in a week or two once it warms up again in Western Canada

If anyone has repaired one successfully, I would sure like to hear about it. any i,mages and tips would be appreciated