Re: Where did you mount your Sprint Booster controller button?
Thanks neighbor! Much appreciated.
I recently noticed Sprint Booster came out with a newer (than mine) 3-way controller button selector. Looks like a sloped-side, chamfered, octagon-shaped, lighted, medallion. Mine is probably the second generation, rounded edge, rectangle, with a single, protruding, lighted button. I'm not sure.
There are probably several mounting options one can use and still have the controller look visually appealing regardless of where one mounts it.
Well, this is not such a popular subject and since I posted this thread, there really haven't been any interest of where anyone would likely install one or if you have one, would you change its current location for whatever reason, be it ergonomically or visually out of place?
There is another member here who has a post floating around on how he did his Sprint Booster installation recently with the newer model. I have the previous model to the octagon medallion controller and I found a perfect place (for me) to mount it. Now, I did this installation a long while back, I was just lazy to post anything about it. So if you have the same controller as mine, this might be a fun project for you and alter your controller location.
The SB installation wasn't that difficult. I just followed all directions except for one. SB controller wire was routed between slide-out drawer and the ashtray container so no wires are ever visible. I just thought I would share this with anyone who would be interested since I have not seen one done this way.
When all was done, There was a noticeable seat-of-the-pants improvement. Since this installation was done, I've always had fun showing to friends. And the funny part about all this is when I reach for the button, I would always hear the James Bond theme playing in my head! 
Thanks for stopping by and Happy motoring, everyone!
Last edited by MAGNATUDE; 05-08-2018 at 06:29 AM.