View Single Post
Old Jun 7, 2018 | 07:36 PM
  #6 (permalink)  
DHS's Avatar
DHS
Joined: Oct 2016
Posts: 252
Likes: 1
From: LaGrange. GA
Default Re: Microlon engine treatment

Update on oil temp gauge, temp comes up very slow, even on interstate at 80mph on cruse control it takes about 40 miles to stabilize. With the out side temp at 85f she runs at about 235f! If I slow down to 70mph it goes to about 225f, and in town about 220f. In the mourning about 70f at 80mph on CC she stays at 220f. So out side temp does have some affect on the temp as does cruise speed. Just put the Microlon metal treatment in yesterday, but coming home it was 97f outside so the temp was still 235f at 80mph.
Will see what she runs at with a temp of 85f to see if the reduced friction is for Real!
 
Reply