Thread: Crankshaft Position Sensor
View Single Post
Old Jun 23, 2018 | 10:20 AM
  #20 (permalink)  
Padgett's Avatar
Padgett
Senior Member
Joined: Oct 2013
Posts: 2,152
Likes: 37
From: Orlando
Default Re: Crankshaft Position Sensor
I keep
<i>one of these </i> one of these
as a spare. Mercs are funny, they do not like el cheapos.


'05 Service manual is available as a .pdf in the archive.


(P0335) CRANKSHAFT POSITION SENSOR CIRCUIT (CONTINUED)
When Monitored and Set Condition
² When Monitored: Engine cranking or running.
² Set Condition: No Crankshaft Position (CKP) signal is present during engine cranking and at least 8 Camshaft
Position Sensor (CMP) signals have occurred.


POSSIBLE CAUSES
CRANKSHAFT POSITION SENSOR SIGNAL 1 CIRCUIT OPEN
CRANKSHAFT POSITION SENSOR SIGNAL 1 CIRCUIT SHORT TO VOLTAGE
CRANKSHAFT POSITION SENSOR SIGNAL 1 CIRCUIT SHORT TO GROUND
CRANKSHAFT POSITION SENSOR SIGNAL 2 CIRCUIT OPEN
CRANKSHAFT POSITION SENSOR SIGNAL 2 CIRCUIT SHORT TO VOLTAGE
CRANKSHAFT POSITION SENSOR SIGNAL 2 CIRCUIT SHORT TO GROUND
CRANKSHAFT POSITION SENSOR SIGNAL 1 CIRCUIT SHORT TO CRANKSHAFT POSITION SENSOR
SIGNAL 2 CIRCUIT
CRANKSHAFT POSITION SENSOR
POWERTRAIN CONTROL MODULE
 
Reply
0