Originally Posted by
zip439
Yes, I changed them myself. It can be difficult but you can do it. There is a tutorial on this website.
Click this link:
https://www.crossfireforum.org/forum...tml#post524311
Be careful with the wire clip. It can come out and then be a pain to install. Also watch how the bulb comes out. The new one will go back in the same way.
There is a trick I read here on the forum, the high beam bulbs have the 'TAB' pointing up, and the low beam bulbs have the 'TAB' pointing down. Make sure the wire clip is seated correctly and all will be good!
.