View Single Post
Old Jul 1, 2019 | 12:28 PM
  #4 (permalink)  
pizzaguy's Avatar
pizzaguy
Administrator
Joined: Jun 2009
Posts: 13,965
Likes: 1,293
From: Fort Worth, Texas
Default Re: Crank Position Sensor Wiring Part#

The boot on my Graphite was cracked, didn't matter, the car ran fine once I put a Bosch sensor in.

In fact, my boot was so brittle, the locking tab broke off when I removed it from the old sensor.
I used a dab of RTV to make the connector stay on the sensor.
 

Last edited by pizzaguy; Jul 1, 2019 at 12:38 PM.
Reply