Originally Posted by
Sussudio
I installed the 04’ Auto dimming mirror on my 05’ SRT6. I followed OKC-XFR instructions. Thank you for the step by step easy peezy. The part I was sent had two connections not just the one. Even though OKC-XFR said there was no other connections that existed, I still was wondering where that other part lead too so I traced the line back to the A-Pillar. There was a connecting line but no way of connecting the other part that was cut from the previous car. I’m attaching a picture to show you what I’m talking about. Maybe someone else can figure it out. I didn’t want to spend more time on it than I already had. Again thank OKC-XFR. Oh and are you in the Oklahoma City area? I live there as well would be cool to have a Crossfire get together.
Do not overthink the problem, you only have to connect the two wires shown in the PDF, the other wire is for connection to a wire that contains a reverse signal. This signal will switch off the dimming function and show the image in the mirror at full brightness. I connected just the two wires and insulated the third wire. I found this to cause no problem and since that time I have fitted a reverse camera so the problem is solved anyway.