Originally Posted by No704

I found a locksmith that was able to make me 2 spare keys. After spending a couple hours disassemble and reassembled to pull a module behind the instrument cluster. He was able to program the new keys to key #1 and key #3. The original switchblade key with remote was programmed as key #2. There was also a key programmed to be key #8 in the memory.

The 2 new keys are no remote, but do work.

We cant get the original switchblade remote to work.

Battery was disconnected for a couple hours.

Standerd relearn procedures are not working.

Locksmith is as puzzled by this as me. He is bowworing a real MB scanner to check it.

We have verifed the remote is sending.

Any ideas?

thx
Neil