Been having major oil burn recently, but the cars performance is still seeming to be great. I’ve replaced my valve cover gaskets and the RTV on top and have no leaks there - looks very clean! Can’t find a leak anywhere.
Oil was filled to near max on the dipstick yesterday, now after a little over 200mile drive it’s about 25% to the max now. Essentially putting oil in my engine as if I’m putting gas in my tank and i can’t figure it out.
I’m spitting codes P2098 and P0151 simultaneously(Codes cleared and same codes popped back up together).
I also replaced the old O-Ring between the engine and throttle body(Was one recommendation on the code).

Any help would be greatly appreciated... Car only has 56.5k miles and I’d love to get quadruple that out of it.