[QUOTE=amx1397;947451]
Originally Posted by
KnightRyder_77
So last night got my drive shaft and middle column bearing on./QUOTE]
I hope you lined up the notches on the driveshaft,, ( one 1/2 has 2 (two) notches and the other 1/2 has 1 (one)notch. the 1 (one) notch when installed will aline in between the two notches . this is for balance ,,,if notches are not alined, you will know where the viberation is coming from as soon as you get to 70 or 80 mph jim
Well I know marked everything and lined up as it was. Before taking off. The ground wire is where it was when i removed the tranny. If for some reason its not right. At least its just the exhaust I will have to drop and not the tranny ....lol