Thread: 2007 Crossfire Coupe - No Start
View Single Post
Old Dec 14, 2020 | 09:01 PM
  #7 (permalink)  
tighed1's Avatar
tighed1
Senior Member
Joined: Aug 2008
Posts: 5,741
Likes: 98
From: Sierra Vista, Arizona
Default Re: 2007 Crossfire Coup - No Start
Originally Posted by a12052
Tighed1
Only the center relay closed on RCM (one not two). No scoring/damage/wear noted on any relay. Other than replacing a relay or RCM anything else at this point?

Thanks and good step in troubleshooting.

Rick
2007 Crossfire Coupe
Looks like the traction control relay is bad. Try this:
With the RCM open, turn the key to the ON position. Pinch the traction relay closed and have someone turn the key to the START position to see if she starts (keep the traction relay held closed).
You can use a rubber band to keep the relay closed. Just don't close the relay until AFTER the key is in the ON position. Pretty sure she'll start.

I refurbish RCMs and can replace your relays if this is the problem. Email tighed1@hotmail.com for the details.

 
Reply
0