Thread: Top and spoiler not working
View Single Post
  #8 (permalink)  
Old 04-19-2021, 08:53 PM
kztkadir's Avatar
kztkadir
kztkadir is offline
Join Date: Sep 2020
Location: Istanbul
Age: 27
Posts: 21
Received 1 Like on 1 Post
Default Re: Top and spoiler not working
Originally Posted by pizzaguy
Water damaged electronics can be very hard to repair. If wiring has corrosion from water, getting connectors cleaned effectively can be very hard to do.
I also doubt the top module is damaged, unless the trunk area has been under water.

Is there any sign of water under the trip pieces? If you raise the lid and look in the wheel wells, is there any sign of water in there like: Corrosion, rust, discoloring of the harnesses, etc.?

For help with figuring out what is going on, try this thread:
https://www.crossfireforum.org/forum...p-sensors.html

Also, this one:
https://www.crossfireforum.org/forum...formation.html

How to manually operate the top:
https://www.crossfireforum.org/forum...operation.html

This man is an expert on the Crossfire and other tops:
https://www.youtube.com/channel/UC42...OglbgpBvTjXpUU
My service told me to buy a new top module. But I'm not sure if they know enough about it. Unfortunately, there is no reliable service where I can have this checked in my hometown. Speaking of the failure of the top module, he said the windows do not go down. What makes the windows go down? Top module or the sensor in the windshield frame? Currently the top module is not connected to my car. The windows do not go down when I turn the latch. How can I check this? I just don't want to buy a top module for nothing. Actually, they say everything will be alright when I get the new top module. But I'm not sure about that. I will be grateful if you could help me.
 
Reply Like