"I BELIEVE I MAY HAVE FOUND MY NO START PROBLEM!" The car has been starting so I decided to put the bezel back on the dash gages. In doing so I removed the RFID Fob antenna ring. Couldn't put the bezel back on so I reinstalled the RFID ring which created a "no start" situation again. Removed ring and studied it. Found it has to be installed in certain way or car won't start. The wire going into the ring has to be at the 2:00 position when installed. Is my RFID ring defective? Doesn't seem to have a definite lock in position around the tumbler nut!