Hello everyone- I’m trying to troubleshoot what is causing our 2006 Crossfire to not start. We purchased the car about two years ago with around 65k miles. The car was not used very often, just for short trips around town.

The first issue we had with the car was the battery dying- we replaced it and have had no issues there since. Around a month or two later, the doors would not lock or unlock with the key or switches inside. We took it to a repair shop and they needed to replace the door lock actuators as they had been corroded. A few months following that, the car refused to start up. All lights and electrical work in the car, but the engine will not turn over. The engine fan turns on, but it won’t start. We attempted to clean the SKREEM module, and replaced the alternator hoping that would work but unfortunately it did not. We had a mobile repair company come out to see if they could diagnose the car, and they diagnosed it with a faulty PCM. We called every dealership in the area as well as some repair shops but no one was able to fix it, so we sent the PCM to Flagship One. They tested the PCM, and told us that the issue was not electrical so they would not need to recode it.

The only aftermarket part that I am aware of is the radio.

We are at a loss at this point with how to proceed- so any help is greatly appreciated! We are really trying to get the car off our hands at this point but we’re hoping to fix it before so we do not lose as much money on it. I have spend hours researching to see if I could find a solution to no avail- so this is a last ditch effort! The car has been sitting in our garage for the past year over my husbands deployment and we are hoping to solve this before we PCS.

The codes that came up when the mobile repair service came out are below- 1022, 1038, and 1175.



I greatly appreciate any and all help with this!