Originally Posted by
Romad
UPDATE 3/24/23: Bought a better code reader and only code was P0101 (MASS Air Flow) The new meter did not pull the P0007 and C101E that was originally posted! This morning I finally got around to replacing the MAF Sensor and all is well now. I did the reset by shorting together the Pos and Neg cables, of course after removing them from the battery, and let it sit for about thirty minutes. Took for a test drive and no more codes and it runs fine with no issues. Thanks to all for your support and suggestions.
First, THANKS for coming back and closing the loop so we can all learn.
SECOND: Notice how easy this was, with the right coder reader.