Thread: Crossfire 2005 central locking fault
View Single Post
Old Oct 9, 2023 | 02:09 PM
  #6 (permalink)  
BlkCell's Avatar
BlkCell
Joined: Nov 2016
Posts: 14
Likes: 2
From: Sun City Center ,Fl
Default Re: Crossfire 2005 central locking fault
Originally Posted by BlkCell
yeah I noticed that today as I was applying a rust dissolver.

One of the wires came right out. I'm like Ughhh.. LoL


This is why you check the PSE plug. A pin from the connecter was rusted off in it and that why the wire broke off.

it pretty easy to see where it came out of. Thank God I'm a electronic technician. LoL
Originally Posted by ZERACER
Be sure to get as much of the wiring harness as you can also because it is probably corroded also.
well this was an adventure to say the least .LoL here is why the devil is in the details. LoL

see that little connector that pin was stuck in it. Cleaned the rust off. Here is the the plug this goes into.


 
Reply
0