Originally Posted by
tdkflorida
My dad was fixing my driver side window which wouldn't go up. He unplug the window motor and tested the current of the wire that was attached. When he went to start the car it stated and then immediately cut back off. Its currently not starting at all. Also the dashboard is not lighting up when the key is turned. The key fob is also not working.
We checked all the fuses and the computer and BCM. It is still not starting up. The battery is fully charged.
We think it could be that the key has been unprogrammed and not being recognized.
Please let me if you know what could be my issue.
Thanks!
Try this first:
Disconnect the negative battery cable for 5 minutes. This will allow all the electronics to go off.
Then reconnect the negative cable.
First thing is to try starting the car.
If it starts and runs turn it off and then try the key fob.
If the key fob doesn't sync, here is a video of how to do it:
If the car doesn't run, use the search bar in the upper right. There is a ton of information on here.
Good luck!