I need a key
Thread Starter
Joined: Mar 2015
Posts: 6
Likes: 0
From: VA
I need a key
Here is the key I was gonna buy:
http://www.ebay.com/itm/Oem-Factory-Complete-Remote-Flip-Switchblade-Key-For-Chrysler-Crossfire-Uncut/311307767966?_trksid=p2047675.c100005.m1851&_trkpa rms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3 D27706%26meid%3D8b6def52bb54488f8997521e4e9e5277%2 6pid%3D100005%26rk%3D1%26rkt%3D6%26sd%3D4008757468 40&rt=nc#
Only thing, the dealer told me that key would be useless because the "factory" has to laser cut that key according to the last 8 digits of the VIN...Is that right?
http://www.ebay.com/itm/Oem-Factory-Complete-Remote-Flip-Switchblade-Key-For-Chrysler-Crossfire-Uncut/311307767966?_trksid=p2047675.c100005.m1851&_trkpa rms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3 D27706%26meid%3D8b6def52bb54488f8997521e4e9e5277%2 6pid%3D100005%26rk%3D1%26rkt%3D6%26sd%3D4008757468 40&rt=nc#
Only thing, the dealer told me that key would be useless because the "factory" has to laser cut that key according to the last 8 digits of the VIN...Is that right?
Senior Member
Joined: Sep 2011
Posts: 9,595
Likes: 26
From: Kellyville, Ok
Re: I need a key
Programming: We know of no way to reprogram this remote so please do your homework before you purchase. We do not take returns on this item.
You did notice the disclaimer I hope. That would have been totally useless.
Noticed this too.. bet some ones not real happy..
More than 10 available / 1 sold
You did notice the disclaimer I hope. That would have been totally useless.
Noticed this too.. bet some ones not real happy..
More than 10 available / 1 sold
Last edited by Mrmiata; Mar 19, 2015 at 06:34 PM.
Thread Starter
Joined: Mar 2015
Posts: 6
Likes: 0
From: VA
Re: I need a key
Kool! Thanks for the website ala_xfire...Gonna save some bucks...He mentions programming the remote yourself...that would save me $100 over letting the dealership bleed me...Anyone know hoe to program the remote?
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 648
From: Ontario
Thread Starter
Joined: Mar 2015
Posts: 6
Likes: 0
From: VA
Re: I need a key
A quote from the needswings.com site when I looked up my key..." You can program the key yourself in a few minutes and save a lot of money versus paying a dealership to do it for you.".....So, has anyone programmed their own key?
Senior Member
Joined: Dec 2010
Posts: 12,780
Likes: 184
From: Lineville, AL
Re: I need a key
The key you get from Rob has already been coded to your SKREEM by you supplying your VIN and proof of ownership when you order the key.
( This is the little non-powered chip in the key that is excited by the round antenna around the key lock )
The part about programming it yourself is about the powered part in the key where you set it to do the remote lock/unlock.
This is the transmitter that interacts with the HomeLink receiver where the 3 buttons are by the dome light.
Instruction on this are in the owners manual ( available from the below link in PDF format if you don't have one )
( This is the little non-powered chip in the key that is excited by the round antenna around the key lock )
The part about programming it yourself is about the powered part in the key where you set it to do the remote lock/unlock.
This is the transmitter that interacts with the HomeLink receiver where the 3 buttons are by the dome light.
Instruction on this are in the owners manual ( available from the below link in PDF format if you don't have one )
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 648
From: Ontario
Re: I need a key
Last edited by onehundred80; Mar 20, 2015 at 08:39 AM.
Thread
Thread Starter
Forum
Replies
Last Post
o55ie18
Troubleshooting & Technical Questions & Modifications
9
Oct 5, 2015 05:50 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)