All Crossfires A place to discuss any model of the Crossfire.

Cross-country for a Crossfire

Thread Tools
 
Old Feb 27, 2017 | 03:49 AM
  #61 (permalink)  
S8MS-01904's Avatar
Thread Starter
Joined: Jan 2017
Posts: 146
Likes: 0
From: Carmel, Indiana
Default Re: Cross-country for a Crossfire

Originally Posted by onehundred80
Did you check the tire pressures before you left?
If not it could have been close to the light coming on when you started back home. A slow leak occuring on your drive and the light comes on.
I did check one tire, it was 44psi. Couldn't get the valve cap back on, so I thought, crud..... I don't want to force it and break the valve, so I quit there.

My guess, one tire was near low limit and thru the Louisville, the road got choppy and who knows.....

The ride was awesome, the tach sits at 2800rpm and the power at that spot is really good.

As I do my deep clean on the Crossfire, I'll discover more goodies.....
 
Reply
Old Feb 27, 2017 | 11:51 AM
  #62 (permalink)  
pop49's Avatar
Joined: Oct 2014
Posts: 125
Likes: 0
From: Australia
Default Re: Cross-country for a Crossfire

Glad you got home safe and enjoyed the trip. 2800 rpm would equate to around 140 Kmph or roughtly what 85 mph?
 
Reply
Old Feb 27, 2017 | 07:30 PM
  #63 (permalink)  
S8MS-01904's Avatar
Thread Starter
Joined: Jan 2017
Posts: 146
Likes: 0
From: Carmel, Indiana
Default Re: Cross-country for a Crossfire

Originally Posted by pop49
Glad you got home safe and enjoyed the trip. 2800 rpm would equate to around 140 Kmph or roughtly what 85 mph?




Cruise was set at 76mph. Tach reading 2800RPM.
 
Reply
Old Feb 27, 2017 | 07:41 PM
  #64 (permalink)  
Speedy4x4's Avatar
Senior Member
Joined: Oct 2013
Posts: 2,006
Likes: 15
From: Southern IL.
Default

Originally Posted by pop49
Glad you got home safe and enjoyed the trip. 2800 rpm would equate to around 140 Kmph or roughtly what 85 mph?
Srt and na have 2 different gear ratios.
3.08 vs 3.27
 
Reply
Old Feb 27, 2017 | 07:42 PM
  #65 (permalink)  
S8MS-01904's Avatar
Thread Starter
Joined: Jan 2017
Posts: 146
Likes: 0
From: Carmel, Indiana
Default Re: Cross-country for a Crossfire

Originally Posted by onehundred80
[SIZE=4]
Is the nipple shown in this How To Fix the one that is broken?




Radiator expansion tank - broke or at least I finished the little nipple and hose off.
 
Reply
Old Feb 27, 2017 | 07:44 PM
  #66 (permalink)  
S8MS-01904's Avatar
Thread Starter
Joined: Jan 2017
Posts: 146
Likes: 0
From: Carmel, Indiana
Default Re: Cross-country for a Crossfire

At rest:


 
Reply
Old Feb 27, 2017 | 07:47 PM
  #67 (permalink)  
S8MS-01904's Avatar
Thread Starter
Joined: Jan 2017
Posts: 146
Likes: 0
From: Carmel, Indiana
Default Re: Cross-country for a Crossfire

My youngest is "sampling" the Crossfire. He likie. It needs clay barred and headlights buffed.


 
Reply
Old Feb 27, 2017 | 08:01 PM
  #68 (permalink)  
Speedy4x4's Avatar
Senior Member
Joined: Oct 2013
Posts: 2,006
Likes: 15
From: Southern IL.
Default

Nice, looks in good shape
 
Reply
Old Feb 27, 2017 | 08:03 PM
  #69 (permalink)  
S8MS-01904's Avatar
Thread Starter
Joined: Jan 2017
Posts: 146
Likes: 0
From: Carmel, Indiana
Default Re: Cross-country for a Crossfire

Well the latest thing I don't yet have a fix for is the Tire Pressure Warning Light (TPMS). All tires have 40psi or more, good tread and caps of the valve stems.

Only thing I can figure is I "Woke them up" during the drive and they need to be reset? I'll try that first.

If that doesn't work, I pull the pin to turn the light out (temporary until tire replacement).

I haven't done anything with the top yet, my youngest wants to wash the car Wednesday and I gotta get a different car ready for a road trip.

Wifey will have her first trip / drive in it Tuesday.

I'll get it back after that to start fixing more stuff. Pulling the cowl is on the list of the deep clean and clay bar / wax job.
 

Last edited by S8MS-01904; Feb 27, 2017 at 08:05 PM.
Reply
Old Feb 28, 2017 | 04:30 AM
  #70 (permalink)  
pop49's Avatar
Joined: Oct 2014
Posts: 125
Likes: 0
From: Australia
Default Re: Cross-country for a Crossfire

Thanks Speedy4x4, I forgot That it is an NA. Still honking along nicely.
 
Reply
Old Mar 1, 2017 | 08:42 PM
  #71 (permalink)  
S8MS-01904's Avatar
Thread Starter
Joined: Jan 2017
Posts: 146
Likes: 0
From: Carmel, Indiana
Default Re: Cross-country for a Crossfire

Got a chance to give the Crossfire a quick wash. Wanted to clean the wheels and wash down the tree sap.

I'll pull the wheels and do a deep clean in a couple of weeks.

Tried the top yesterday, windows go down and then switch slow blinks. First check is switch in bow. This will take time.
 
Reply
Old Mar 1, 2017 | 08:45 PM
  #72 (permalink)  
S8MS-01904's Avatar
Thread Starter
Joined: Jan 2017
Posts: 146
Likes: 0
From: Carmel, Indiana
Default Re: Cross-country for a Crossfire

Originally Posted by S8MS-01904



Cruise was set at 76mph. Tach reading 2800RPM.
Does the RPM's seems right for the MPH? Not sure if overdrive is kicking in.

Notice the mileage??? Hit 111,111 on my way home!!!
 

Last edited by S8MS-01904; Mar 1, 2017 at 08:48 PM.
Reply
Old Mar 2, 2017 | 05:14 AM
  #73 (permalink)  
ala_xfire's Avatar
Senior Member
Joined: Dec 2010
Posts: 12,780
Likes: 185
From: Lineville, AL
Default Re: Cross-country for a Crossfire

Originally Posted by S8MS-01904
Got a chance to give the Crossfire a quick wash. Wanted to clean the wheels and wash down the tree sap.

I'll pull the wheels and do a deep clean in a couple of weeks.

Tried the top yesterday, windows go down and then switch slow blinks. First check is switch in bow. This will take time.
First check the divider switch in the trunk, then the 'top raised' switch above the passenger's right ear ( these two are in series ).
If those are OK, next check the trunk latched switch.
 
Reply
Old Mar 4, 2017 | 01:13 PM
  #74 (permalink)  
S8MS-01904's Avatar
Thread Starter
Joined: Jan 2017
Posts: 146
Likes: 0
From: Carmel, Indiana
Default Re: Cross-country for a Crossfire

Well, after the TPMS inspection at the tire store on Thursday, (one sensor not communicating) I decided to "temporary" disable the dash warning light.

https://www.crossfireforum.org/forum...tml#post537700

The write-up was spot on and I completed the task.

Now, however, The map lights/dome lights are not functioning. They did so after putting everything back together. At a loss on that right now.

Two steps forward, one back.

Is there a fuse in the fuse box for these lights?
 
Reply
Old Mar 4, 2017 | 01:16 PM
  #75 (permalink)  
S8MS-01904's Avatar
Thread Starter
Joined: Jan 2017
Posts: 146
Likes: 0
From: Carmel, Indiana
Default Re: Cross-country for a Crossfire

Played with the top about the same time, still the windows go down, trunk locks, divider switch made, bow switch sampled in both "ON and "OFF" conditions.

Switch beeps and rapid blinks. What's next step.
 
Reply
Old Mar 4, 2017 | 01:22 PM
  #76 (permalink)  
S8MS-01904's Avatar
Thread Starter
Joined: Jan 2017
Posts: 146
Likes: 0
From: Carmel, Indiana
Default Re: Cross-country for a Crossfire

Trunk light bulb burnt out, replaced with LED #578 from Wallyworld. Has four LED's, nice and bright.

BUT, now the light is always on.!!!

So, has anyone experienced with taking the locking mechanism apart to fix the switch? Or is there something else to look for?
 
Reply
Old Mar 4, 2017 | 01:24 PM
  #77 (permalink)  
S8MS-01904's Avatar
Thread Starter
Joined: Jan 2017
Posts: 146
Likes: 0
From: Carmel, Indiana
Default Re: Cross-country for a Crossfire

I did however, got Homelink to work!!!

One step forward......
 
Reply
Old Mar 4, 2017 | 01:26 PM
  #78 (permalink)  
S8MS-01904's Avatar
Thread Starter
Joined: Jan 2017
Posts: 146
Likes: 0
From: Carmel, Indiana
Default Re: Cross-country for a Crossfire

https://www.facebook.com/photo.php?fbid=1884337558505078&set=pcb.1883942831862566&type=3
Washed.

Must have washed the color right away......

Actually the links ain't populating....
 

Last edited by S8MS-01904; Mar 4, 2017 at 01:41 PM.
Reply
Old Mar 4, 2017 | 01:39 PM
  #79 (permalink)  
S8MS-01904's Avatar
Thread Starter
Joined: Jan 2017
Posts: 146
Likes: 0
From: Carmel, Indiana
Default Re: Cross-country for a Crossfire

https://www.facebook.com/photo.php?fbid=1884337558505078&set=pcb.1883942831862566&type=3&theater
Recently washed.

Same....
 

Last edited by S8MS-01904; Mar 4, 2017 at 01:41 PM.
Reply
Old Mar 5, 2017 | 11:54 PM
  #80 (permalink)  
Speedy4x4's Avatar
Senior Member
Joined: Oct 2013
Posts: 2,006
Likes: 15
From: Southern IL.
Default

Originally Posted by S8MS-01904

Cruise was set at 76mph. Tach reading 2800RPM.
Originally Posted by S8MS-01904

Does the RPM's seems right for the MPH? Not sure if overdrive is kicking in.

Notice the mileage??? Hit 111,111 on my way home!!!
Here is mine, on a 6 speed manual, with brand new 285/35R19 's

I know what you are thinking, I was used to rpm between 1,600 and 2,200

There is a 2.88 differential from a forum member.

Also a 3.07 is in the srt

We have a 3.27 in our N/A

The little bit taller tires drops rpm a scosh.

ForumRunner_20170305_224946.png
 
Reply



All times are GMT -4. The time now is 12:13 PM.