Hey folks i am having problems with 2 things, one is that this car has a build of Jan 2000 and how can i figure out the production number of the car?
Also is there a report simular to the Marti Report for a Chrysler?
1C3AN69L94X004460
CEDAR SLATE INT.
Sapphire Silver Blue Metallic
THANKS FOR THE HELP

 

The vin says it is #4460 built. If it was built in 2000 it almost sounds like a prototype. Post a photo of the build tag.

 

I will get that, i had had a buddy at a dealer pull the production date and showed Jan 1rst 2000 on a Saturday

 

there should be a tag on the driver door that gives month and year it was made ...a little lower on the same tag is M/D/H is Month Day Hour it was made ... mine reads 08/04 on the top number (August 2004) bottom reads 081614 (August 16th 1400 hours or 2pm)

 

4460 is a somewhat early production car built in July of 2003 sometime between the 11 and 15th of the month

 

SUPER detective work!


.

 

The identifier of the 14th hour of the day the car was produced indicates it rolled off the assembly line somewhere between 1301 & 1400 (1:01PM - 2:00PM). Not sure I've ever heard what the production rate was for the Crossfire so I've never figured out how many cars were produced in a 60 minute period. It would be an interesting analysis if any of us could find Crossfires in sequential order to narrow down exactly when any of our cars were produced during that hour period. Thought I remembered a list somewhere where specific Crossfire production was listed sequentially.

 

Car would truly be a rare find with a production date that early in the series.

 

Is the body made out of clay?

 

Good one.

 

CarFax report shows the car being sold initially in OCT/2003. I doubt it was assembled nearly 3+ years earlier, but anything is possible.

 

The OP is trying to use the last four numbers of the Vin to get the date ... that don't always work ... he needs to read the driver side door plate that will provide him with the month, day, year, and hour of manufacture