I'm goin gto do a custom stereo install on my crossfire. I will be installing air ride in the next month and I have my set up picked out. I'm doing an all digital set up with self leveling and auto lay out. Next step is the stereo. I haven't taken it apart yet, but I need to know if any one has had an issue with speaker depth in the doors. I plan on fiberglassing 6.5" Kicker SS compnents in the doors and doing a kicker DS series 3.5" coax fiberglassed into the lower front pillars. Then doing 8" Solo Barics in a panel behind he head rest atop the divider. So i guess this is 2 questions

1. Will I have a depth issue in my door speakers?
2. Is that divider behind my seat removable or does anyone have a cutaway diagram of that divider behind the seat?

 

#2

I would tell you to go ahead and cut the divider up with a torch, but I think the fuel tank is in there.

 

Yup, that divider is the fuel tank.... I highly recommend NOT drilling in there

And while I don't know 100% for sure, the depth sounds like it WILL be a problem. Our subs are extremely shallow.

 

the fuel tank im pretty sure only goes half way up the wall. because the speakers are in the upper portion and the roll bars in the roadster go in there as well