Commercial Sponsor Classifieds In order to post in this forum you must be a Commercial Sponsor. If you are not a commercial sponsor you will need to buy a sponsorship to create new threads in this section.

Welcome to the Crossfire Shop!

Thread Tools
 
Search this Thread
 
Old Apr 5, 2012 | 09:25 PM
  #41 (permalink)  
dskul1's Avatar
Joined: Jan 2012
Posts: 155
Likes: 0
From: Old Hickory, Tennessee
Default Re: Welcome to the Crossfire Shop!

I now need the left and right access covers for the fog lights that are located behind the front bumper. Also, I was told that there is a cover that is under the front bumper area, engine? Not sure. I think I am missing most of the plastic shrouds/covers underneath the car. I am not sure how many there are and location. Do you have one of the SRT 6 emblems off the back of the car? Any stock stereos or w/gps? Thanks for your help.
 
Reply
Old Apr 5, 2012 | 10:17 PM
  #42 (permalink)  
MrMoPar's Avatar
Thread Starter
|
www.TheCrossfireShop.com
Joined: May 2011
Posts: 578
Likes: 3
From: NW Ohio
Default Re: Welcome to the Crossfire Shop!

Originally Posted by dskul1
I now need the left and right access covers for the fog lights that are located behind the front bumper. Also, I was told that there is a cover that is under the front bumper area, engine? Not sure. I think I am missing most of the plastic shrouds/covers underneath the car. I am not sure how many there are and location. Do you have one of the SRT 6 emblems off the back of the car? Any stock stereos or w/gps? Thanks for your help.
There is a "pan" under the engine from crossmember to the bottom lip of the front fascia. Unfortunately, all my vehicles were hit in the front, so I do not have the under engine cover. I am also out of the fog light access covers.

I do have rear SRT emblems, and a clean standard infinity stereo, and a navigation version also.
 
Reply
Old Apr 5, 2012 | 10:23 PM
  #43 (permalink)  
MrMoPar's Avatar
Thread Starter
|
www.TheCrossfireShop.com
Joined: May 2011
Posts: 578
Likes: 3
From: NW Ohio
Default Re: Welcome to the Crossfire Shop!

Originally Posted by TedLast
I'm looking for the in-dash switch for the spoiler. Could you let me know if you have one and how much?

Thanks
PM me if still need switch, I think I might have one.
 
Reply
Old Apr 13, 2012 | 11:00 PM
  #44 (permalink)  
RMADERMAN's Avatar
Senior Member
Joined: Jan 2007
Posts: 2,116
Likes: 0
From: Miami, Florida
Default Re: Welcome to the Crossfire Shop!

If course my warranty expired 500 miles ago and I take my car to get the rear tires changed and the mechanic tells me there is a problem in the front some where.

Checking it out on the lift and he said the "Center Link" is loose. And it is. It goes across from wheel to wheel and the stablilzer bar is attached to it.

Please check your SRT's and hopefully you have "Center Link" that is undamaged and straight. Let me know how much plus shipping to 33142.

ps I got the clips.

Thanks Randy
 
Reply
Old Apr 14, 2012 | 10:01 AM
  #45 (permalink)  
dskul1's Avatar
Joined: Jan 2012
Posts: 155
Likes: 0
From: Old Hickory, Tennessee
Default Re: Welcome to the Crossfire Shop!

Originally Posted by MrMoPar
There is a "pan" under the engine from crossmember to the bottom lip of the front fascia. Unfortunately, all my vehicles were hit in the front, so I do not have the under engine cover. I am also out of the fog light access covers.

I do have rear SRT emblems, and a clean standard infinity stereo, and a navigation version also.
How much for the stereos and the emblems? Does the navigation stereo need anything else to operate? Antennas, connectors, etc? Any idea where I might find the pan and the fog light access covers? Thanks!
 
Reply
Old Apr 21, 2012 | 12:53 PM
  #46 (permalink)  
dskul1's Avatar
Joined: Jan 2012
Posts: 155
Likes: 0
From: Old Hickory, Tennessee
Default Re: Welcome to the Crossfire Shop!

I have not heard back from you about these parts. I have also tried e-mail to mrmopar. Am I doing something wrong in trying to get my messages to you? Please let me know. Thanks!
 
Reply
Old Apr 23, 2012 | 03:29 PM
  #47 (permalink)  
rayth's Avatar
Senior Member
Joined: Jan 2008
Posts: 1,690
Likes: 3
From: Littleton, MA
Default Re: Welcome to the Crossfire Shop!

do you have any OEM floor mats that fit a coupe? thanks
 
Reply
Old Apr 25, 2012 | 12:58 AM
  #48 (permalink)  
jonnyangel04's Avatar
Senior Member
Joined: Jun 2006
Posts: 1,613
Likes: 1
From: Lakeville, MN/ River Falls, WI
Default Re: Welcome to the Crossfire Shop!

Ordered a ton of parts from Tim! I could not be more satisfied with the quality of parts I received. Prompt on responses, through all channels. Knowing he is a busy guy, I can not fathem the amount of requests he receives. A true asset to the forum for sure !! I just wanted to say thank you once again.
 
Reply
Old Apr 28, 2012 | 12:21 AM
  #49 (permalink)  
MrMoPar's Avatar
Thread Starter
|
www.TheCrossfireShop.com
Joined: May 2011
Posts: 578
Likes: 3
From: NW Ohio
Default Re: Welcome to the Crossfire Shop!

Originally Posted by rayth
do you have any OEM floor mats that fit a coupe? thanks
Yes but I need to clean them.
 
Reply
Old Apr 28, 2012 | 12:23 AM
  #50 (permalink)  
MrMoPar's Avatar
Thread Starter
|
www.TheCrossfireShop.com
Joined: May 2011
Posts: 578
Likes: 3
From: NW Ohio
Default Re: Welcome to the Crossfire Shop!

Originally Posted by dskul1
How much for the stereos and the emblems? Does the navigation stereo need anything else to operate? Antennas, connectors, etc? Any idea where I might find the pan and the fog light access covers? Thanks!
Nav radio is $225 and GPS antenna is $45. Plus s/h.

I have not decided if I am selling SRT6 emblems at this point.
 
Reply
Old Apr 28, 2012 | 01:01 AM
  #51 (permalink)  
rayth's Avatar
Senior Member
Joined: Jan 2008
Posts: 1,690
Likes: 3
From: Littleton, MA
Default

Originally Posted by MrMoPar
Yes but I need to clean them.
Thanks, pm me a price if you can
 
Reply
Old May 7, 2012 | 10:22 PM
  #52 (permalink)  
Guy Richards's Avatar
Joined: May 2012
Posts: 1
Likes: 0
Default Re: Welcome to the Crossfire Shop!

Has anyone used the $69 chip that's supposed to give your Crossfire more horsepower and better gas mileage? Does it work? Any problems?

Guy
 
Reply
Old May 7, 2012 | 10:31 PM
  #53 (permalink)  
MrMoPar's Avatar
Thread Starter
|
www.TheCrossfireShop.com
Joined: May 2011
Posts: 578
Likes: 3
From: NW Ohio
Default Re: Welcome to the Crossfire Shop!

Originally Posted by Guy Richards
Has anyone used the $69 chip that's supposed to give your Crossfire more horsepower and better gas mileage? Does it work? Any problems?

Guy
Old trick, is a .39 cent resistor in a fancy package to trick the computer into seeing a lower than actual intake air temp. This allows the engine to run more ignition advance. If it advances too much, you get knock and knock sensors likely will pull more timing than the gain from the resistor.

Does it work? Yeah, sometimes. Worth $70? No, save and get a good programmable water/meth injection system for real benefits.
 
Reply
Old May 8, 2012 | 01:35 PM
  #54 (permalink)  
ichon's Avatar
Senior Member
Joined: Jan 2005
Posts: 1,481
Likes: 0
From: Central Maryland
Default Re: Welcome to the Crossfire Shop!

Tim, do you have a driver's side interior door panel and window regulator available (for a N/A coupe)? Also, I havent received the interior taillight cover panels yet. LMK, thanks Chas
 
Reply
Old May 8, 2012 | 05:10 PM
  #55 (permalink)  
2005 Ragtop's Avatar
Joined: Jul 2009
Posts: 166
Likes: 0
Default Re: Welcome to the Crossfire Shop!

Tim,
Center console, rear storage compartment bezel (arrow head shaped bezel on top of compartment door). Have any ? If "Yup", lemme know on price. Jack pads received were in much better shape than I anticipated, nice work. Many thanks.

V/R
Tim Worley - 2005 Ragtop
 
Reply
Old May 8, 2012 | 08:29 PM
  #56 (permalink)  
MrMoPar's Avatar
Thread Starter
|
www.TheCrossfireShop.com
Joined: May 2011
Posts: 578
Likes: 3
From: NW Ohio
Default Re: Welcome to the Crossfire Shop!

Originally Posted by 2005 Ragtop
Tim,
Center console, rear storage compartment bezel (arrow head shaped bezel on top of compartment door). Have any ? If "Yup", lemme know on price. Jack pads received were in much better shape than I anticipated, nice work. Many thanks.

V/R
Tim Worley - 2005 Ragtop
Yes, have them. Trying to move some stuff so I can get pics and change my storage around. Too much to do, not enough time.....

Glad pads were great.
 
Reply
Old May 8, 2012 | 08:31 PM
  #57 (permalink)  
MrMoPar's Avatar
Thread Starter
|
www.TheCrossfireShop.com
Joined: May 2011
Posts: 578
Likes: 3
From: NW Ohio
Default Re: Welcome to the Crossfire Shop!

Originally Posted by ichon
Tim, do you have a driver's side interior door panel and window regulator available (for a N/A coupe)? Also, I havent received the interior taillight cover panels yet. LMK, thanks Chas
Regulators I have, I have dark slate (black) door panels. What color?
 
Reply
Old May 8, 2012 | 09:51 PM
  #58 (permalink)  
oledoc2u's Avatar
Senior Member
Joined: Mar 2008
Posts: 14,599
Likes: 34
From: IN
Default Re: Welcome to the Crossfire Shop!

Tim, I have paid up to $50 for an SRT6 emblem... Hard to find. I marked my cars like the old Z28... front sides and back...lol... I have a switch a panel as well, as I only needed one switch, so I could let that go if you or anyone else has a need.
 
Reply
Old May 8, 2012 | 11:12 PM
  #59 (permalink)  
MrMoPar's Avatar
Thread Starter
|
www.TheCrossfireShop.com
Joined: May 2011
Posts: 578
Likes: 3
From: NW Ohio
Default Re: Welcome to the Crossfire Shop!

Originally Posted by oledoc2u
Tim, I have paid up to $50 for an SRT6 emblem... Hard to find. I marked my cars like the old Z28... front sides and back...lol... I have a switch a panel as well, as I only needed one switch, so I could let that go if you or anyone else has a need.
You can get a new OEM 2006 SRT6 emblem, but you can't get a new 2005 version of the emblem. You can get copies of the 2006 emblem, but not of the 2005 emblem. So, right now, I am inclined to simply sit on the 05 emblems. Originals will only go up in value. New 2006 OEM emblems go for $165 now.

For some reason, it seems that while they will sell rights to reproduce the 2006 script, they have not released or sold any rights to the 2005 text/logo.
 
Reply
Old May 9, 2012 | 02:28 PM
  #60 (permalink)  
ichon's Avatar
Senior Member
Joined: Jan 2005
Posts: 1,481
Likes: 0
From: Central Maryland
Default Re: Welcome to the Crossfire Shop!

Originally Posted by MrMoPar
Regulators I have, I have dark slate (black) door panels. What color?
Hey Tim, the black panel will do. Please advise cost for the panel and the regulator. Thanks again, Chas
 
Reply



All times are GMT -4. The time now is 03:27 AM.