Hello I'm looking for a black front bumper for my 2005 crossfire someone let me know if you have one!!!

 

Sorry, no front body parts.

 

i need a rcm and a front turn signal socket

 

Sent a PM to you.

 

I could use a window switch...

 

Do you have the vacuum pump for the power locks for the SRT6 located in the trunk area of the car?

 

I am looking for part # 5174703AA. It is the front indicator/turn signal bulb housing. I need one for both front sides. Mine has stopped working and I have searched everywhere for one with no luck. Do you have them or can you source them for me? Any help would be appreciated.

 

Looking for the tan trunk lining as well as the adjacent black plastic piece and the black piece the seat belt comes out of. I posted pictures here: https://www.crossfireforum.org/forum...ide-xfire.html

Thanks for your help!

 

My 17 year-old daughter broke both speaker covers when she changed the rear subs. Do you have any of the speaker covers?


Thanks

 

he no longer has the shop, so you will have to email him to see what he has left....

 

Hi, I think this is how to reply... The parts I need are the small plastic covers for the subwoofers. My daughter broke both when she replace her subs. My email is rayon29498@hotmail.com.


Thanks

 

try emailing him..... He no longer has the shop.... but may have a few parts left...been awhile since we have heard from him

 

I still have lots of parts. Stripped out the last two bodies and moved out of the storage unit. Pretty sure have the covers. Will email you and let you know. If someone wants something, use the email option rather than a pm.

 

Hi Tim, hoping you can help me looking for turn signal socket for an '04. Let me know how many you have?

 

looking for the Central Lock vacuum pump module with part # 1708000848, thanks. Sorry, just noticed this thread is 18 month old. Still need it but not sure if anything is available at this point.

 

They are freely available but they are not cheap.
Inspect the plugs attached to the wiring harness and see if they are required as well. If water got into the box you can be sure the plugs got wet and corroded as well. So buy a module with all the plugs that have been cut of the harness. It would be wrong to buy the module and then have to look for the plugs.

 

Sent you a pm.

 

Good day,
I’m a new crossfire owner (2005 SRT6)
I would need a rear jack pad drivers side and the access doors (both left and right) for the fog lamps. The doors on the inside of the wheel wells (I thought they were brake vents, until I removed my tires to do the brakes and realized what was missing)
Thanks

 

This is a six-year-old thread and not active anymore, you can get brand new fog light covers and jack pads from NeedsWings, both are available from wrecked cars.
Fog light covers, https://www.needswings.com/fog-light-access-panels. Cover seams with Gorilla tape and never lose another one.
Jack pad, https://www.needswings.com/crossfire-jack-pads