This is a tracking thread for interest in specific parts.

2005, SSB SRT-6, damage to left front fender, fascia, drivers door. Is a complete vehicle at this point. Delivery expected 12/30/2011.

The following have expressed interest in the following parts;

Pitmarshall – SRT-6 rims

AVAILABLE – SRT-6 complete drive train package(engine, trans, differential, vin coded modules, wiring harnesses, intercooler system)

Mferreira3417 – SRT-6 complete dash and center console (no electrical/electronics, or silver trim) - Shipped

MJPowers - SRT calipers, rotors, and springs - In progress
Wedge - Springs

James1549 - Windshield trim - SOLD

Velociabstract - Passenger side sail panel, quarter window trim, seat belt trim, rear sway bar links.

SparkieSRT6 - Steering Wheel, possibly airbag, rubber e-brake cover..

Rmaderman - Fender to body seals.- Shipped

Blacksrt6 - Both inner front fender well plastic doors, Both clear plastic tag light lenses, All rubber jacking points under the car, rubber bumpers off the valve covers that the intake filter clips to.

Primeaux - Seats, Headlights, Ash Tray, Door Speaker Covers - REPLIED


Post any item you are interested in, and I will keep the list updated. Even if someone else is on the list, you will be next in line if first on list passes. Also we are looking at several other SRT-6's in middle/late January. Once I get the vehicle in and verify condition, I will PM with price. You can also email me at - thecrossfireshop @ gmail . com (remove the spaces).

 

If the windshield trim survived, I am interested. James

 

I am interested in rear wing

 

And maybe the trans and rear end and TCU., front and rear sway bars.

 

I need a passenger side sail panel that goes from the small window to the trunk area and the dark gray part that covers the seat belt anchor and beneath the small side window on the same side. Well, if you can get them off without breaking them.

Les

 

Interested in the springs

 

Are you still interested in the differential from the Limited? Let me know.

 

no i don't have a need for any of the silver trim, also took pics today of dash parts that i need, i will forward them to you email. the rear console is what i need without the cupholder and mirror adjuster switch so you can sell them. i have these parts i want from you, but the wrong color that origanily came with the car. i need the dark slate/charcoal color. the top dash pad on mine is in rough shape all from when they stole the airbag and would like to replace it. i allready replaced the airbag for 1800 from dealer

 

Here are the interior pics.

 

I think I am more interested in the SRT rear end. by adding a turbo to my V8, I should be well past the torque limits of the n/a trans. The SRT trans is the same as the 722.6 that was used behind n/a MB V8's. Unfortunately, If I change trans I also have to switch to a 3.07 rear end and use the correct TCU for the trans and rear ratio. Take me off the list for the n/a rear end.

 

Interested in the steering wheel if in great condition.

Thanks.

 

When Ashley had the Lambo doors they cut the plastic piece in front of the door separating the inner fender and wheel well. It has one screw/bolt holding it in. It is about 4 inches wide and 18 inches high. I need both sides. Thanks Randy

 

Those should not be a problem.

 

With or without bag?

 

Really depends on how much $. Would love the bag too but only if inexpensive.

Thanks.

 

Here are the junkyard parts that I have been looking for:

1. Both inner front fender well plastic doors
2. Both clear plastic tag light lenses
3. All rubber jacking points under the car
4. All rubber bumpers off the valve covers that the intake filter clips to

 

I will check on those. We are looking at making a replacement panel that won't come off. The SRT is scheduled to show up Friday. I will check the limited also.

 

Please add my interest in:

The slide on/off rubber handle for the parking brake.

 

Am sure I have one of those.

 

I want the one off the SRT6........will match my cars interior colour.