2005 Alabaster Limited Part out thread.
The following have expressed interest in the following parts
2005 Alabaster Limited, damage to front fenders, fascia, hood, passenger door.
Interior has been removed/sold, dash pad airbag blown, audio equipment, mirrors, tail lights, spoiler motor, jack package/compressor/tire fit, removed/sold (all through JHM2K).
Majority of chassis is complete at this point.
JimmySkullz – Limited exhaust/headpipes
WSPO - Left rear side marker lamp.
Post any item you are interested in, and I will keep the list updated. Once I get the vehicle in and verify condition, I will PM with price. You can also email me at - thecrossfireshop @ gmail . com (remove the spaces).
2005 Alabaster Limited, damage to front fenders, fascia, hood, passenger door.
Interior has been removed/sold, dash pad airbag blown, audio equipment, mirrors, tail lights, spoiler motor, jack package/compressor/tire fit, removed/sold (all through JHM2K).
Majority of chassis is complete at this point.
JimmySkullz – Limited exhaust/headpipes
WSPO - Left rear side marker lamp.
Post any item you are interested in, and I will keep the list updated. Once I get the vehicle in and verify condition, I will PM with price. You can also email me at - thecrossfireshop @ gmail . com (remove the spaces).
Last edited by MrMoPar; Dec 28, 2011 at 03:06 PM.
Originally Posted by MrMoPar
Got the chassis back to the shop, once I recover from 22 hours driving, will start pulling it apart.
Just a heads-up, I will be making some of the previously removed/spoken-for items available.
FYI, the springs on the car are actually SRT-Grade, and have been trimmed for handling/stance. Same for the sway-bar... A nice upgrade for a limited owner.
Cheers,
--John
hey, i dont know if you still have parts available, but im looking for a midpipe. Like the part in between the cats and the muffler. From my understanding a normal one isnt welded to the muffler, whereas mine is.. so if you have that id be interested. Also if you have the muffler and have a package deal of sorts id be interested.
hey, i dont know if you still have parts available, but im looking for a midpipe. Like the part in between the cats and the muffler. From my understanding a normal one isnt welded to the muffler, whereas mine is.. so if you have that id be interested. Also if you have the muffler and have a package deal of sorts id be interested.
Last edited by James1549; Jun 7, 2012 at 09:40 PM.
How much for the rear wing?not the assembly... is the condition good? no rust underneath? no bubbles? mileage on car?
Lots left, but no lower engine shields.
Still interested in the wing, just the actual wing, nothing else. Paypal is ready.
Yep, sway bar, bushings, hardware if needed (same hardware as NA).
Contact me directly at
thecrossfireshop @ gmail . com (remove spaces)
Contact me directly at
thecrossfireshop @ gmail . com (remove spaces)
Fubu, contact me directly at
thecrossfireshop @ gmail . com (remove spaces)
thecrossfireshop @ gmail . com (remove spaces)
Last edited by MrMoPar; Jul 29, 2012 at 03:39 PM.
Hi,
I need the small rectangular male plug with three-four inches of wire attached plug that inserts into the dome light assembly of the Crossfire.
I think they are all the same..I have a 2006 roadster.
Please let me know if you have access to such a used part..
KJN
I need the small rectangular male plug with three-four inches of wire attached plug that inserts into the dome light assembly of the Crossfire.
I think they are all the same..I have a 2006 roadster.
Please let me know if you have access to such a used part..
KJN
Just in case..and I didn't check closely, but sure reminded me of a power supply plug on a computer accessory ..
Radio shack..


