M/T remote start for car?
I don't think you can because of hte potential that the car is left in gear; you could damage the clutch.
I'm pretty sure it's an automatic tranny thing only
I'm pretty sure it's an automatic tranny thing only
You have also the issue of the transponder in the key. Check audio/video section and some have figured it out. I think they had to take a duplicate key and install it close enough to send the signal to start. I love remote start and have it on all my cars, and I don't even live in the snow, but I don't want to mess with this car. I have installed r/s starts since the late 80's. I had one on a manual mustang, but you have to make sure you don't leave it in gear. You bypass all the safety by wiring to start a manual. You get used to it and pretty soon it becomes habit. Good luck.
Cruzinquick
Cruzinquick
Originally Posted by cruzinquick
You have also the issue of the transponder in the key. Check audio/video section and some have figured it out. I think they had to take a duplicate key and install it close enough to send the signal to start. I love remote start and have it on all my cars, and I don't even live in the snow, but I don't want to mess with this car. I have installed r/s starts since the late 80's. I had one on a manual mustang, but you have to make sure you don't leave it in gear. You bypass all the safety by wiring to start a manual. You get used to it and pretty soon it becomes habit. Good luck.
Cruzinquick
Cruzinquick
The Clifford G5 is designed to work for cars that use manual. If you read under "IntelliStart" it tells you that it works for manuals and automatics. There are a lot of cars out there that are setup to remote start with manual transmission. I don't think anyone with a Crossfire has installed an aftermarket alarm yet though. The transponder key can easily be bypassed with a bypass module. The new bypass modules don't require a key.
i have an alarm on mine with the 2 way pager key chain thing. but no matter what even if it worked without removing the clutch start switch, you would still have to leave the car in nuetral for the remote start.
Originally Posted by pt0001
The Clifford G5 is designed to work for cars that use manual. If you read under "IntelliStart" it tells you that it works for manuals and automatics. There are a lot of cars out there that are setup to remote start with manual transmission. I don't think anyone with a Crossfire has installed an aftermarket alarm yet though. The transponder key can easily be bypassed with a bypass module. The new bypass modules don't require a key.
thanks,
cruzinquick
Our shop installs quite a few Remote Starts but the liability is too great to touch a manual transmission vehicle. Switches fail quite often and one can only imagine it starting in gear and hitting someone.
Thread
Thread Starter
Forum
Replies
Last Post
roychez
Engine, Exhaust, Transmission and Differential
15
Aug 31, 2022 01:11 AM
ultrajim49
Troubleshooting & Technical Questions & Modifications
17
Jun 27, 2015 12:20 AM
mhajek18
TSBs and How-To Articles
1
Jun 17, 2015 01:35 PM
gtjl
Troubleshooting & Technical Questions & Modifications
4
Jun 10, 2015 02:44 PM
gobraves423
Troubleshooting & Technical Questions & Modifications
10
Jun 6, 2015 07:03 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



