View Poll Results: New Crossfire Emblem Survey
A
0
0%
B
1
1.59%
C
0
0%
D
15
23.81%
E
9
14.29%
F
38
60.32%
Voters: 63. You may not vote on this poll
NEW Crossfire Emblem Survey
Senior Member
Joined: Sep 2007
Posts: 1,794
Likes: 1
From: Texas Hill Country
Re: NEW Crossfire Emblem Survey
Originally Posted by H82BL8
Very limited. Only ones like them on the planet, far as I know. Thanks to everyone that has ordered and I'm glad you enjoy them Stogey! I hear deer even like them!
Last count I think I have something like 28 Black sets, 25 Red and 45 Silver sets left.
Last count I think I have something like 28 Black sets, 25 Red and 45 Silver sets left.
Re: NEW Crossfire Emblem Survey
!
Joined: May 2007
Posts: 33
Likes: 0
Re: NEW Crossfire Emblem Survey
Originally Posted by H82BL8
These are different than Andrews emblems. I sent these files to Andrew back in the spring to see if his printer could work with them. Turns out they could not hold registration with the amount of detail. Long story short - these are solvent ink printed on poly, they have a heavy-duty automotive adhesive on the backs.
Here is how its done:
1 - Clean the wing - OEM emblem surface with alcohol.
2 - Remove X-Fire emblem from backing paper. Align/Center your new emblem where you want it. If applying to the stock wings, you do not have to remove the stock emblem. I recommend lining up the top edge flush with the OEM emblem, making sure the “Crossfire” lettering is straight.
3 - Place pressure in the middle of the emblem and work your way outwards in a circular motion. These emblems are pressure sensitive.
It's a little trickier but if you get the top edge on right, and the lettering straight, it drops into place, piece of cake.
Here is how its done:
1 - Clean the wing - OEM emblem surface with alcohol.
2 - Remove X-Fire emblem from backing paper. Align/Center your new emblem where you want it. If applying to the stock wings, you do not have to remove the stock emblem. I recommend lining up the top edge flush with the OEM emblem, making sure the “Crossfire” lettering is straight.
3 - Place pressure in the middle of the emblem and work your way outwards in a circular motion. These emblems are pressure sensitive.
It's a little trickier but if you get the top edge on right, and the lettering straight, it drops into place, piece of cake.
Thank you
Tom
Senior Member
Joined: Feb 2008
Posts: 3,665
Likes: 5
Thanks
Senior Member
Joined: Apr 2009
Posts: 2,358
Likes: 6
From: Kingsport Tn.
Re: NEW Crossfire Emblem Survey
Originally Posted by mrphotoman
Those were taken with my bad@ss cell phone lol 
what kind is it
Senior Member
Joined: Feb 2008
Posts: 3,665
Likes: 5
Re: NEW Crossfire Emblem Survey
Originally Posted by hcarter
that cell phone look like a camera in the second image what kind is it
Here are a few pics I took on my break at work back in the fall, I just snapped a few to try it out so they are all handheld.
007r2.jpg
007r3jpg.jpg
008r.jpg
018r.jpg
Senior Member
Joined: Feb 2008
Posts: 3,665
Likes: 5
Re: NEW Crossfire Emblem Survey
it looks exactly like a camera on the camera side because it does have a REAL camera built in. I have some more pics of it in the CF thread in the srt6 section.
and the flip side of the phone looks like this:
and the flip side of the phone looks like this:
Thread Starter
|
Senior Member
Joined: Aug 2006
Posts: 1,053
Likes: 0
From: Colorado Springs, CO
Re: NEW Crossfire Emblem Survey
CLOSE-OUT SALE!
bowlman169 - Your Red emblems shipped this afternoon! A nice match for your StopTech's. Thanks. - H82BL8
bowlman169 - Your Red emblems shipped this afternoon! A nice match for your StopTech's. Thanks. - H82BL8
