how can i get the cob webs out of my driver side headlight. can i simpley just take off the front plastic?
please let me know. its pissing me off lol

thank you for your time

 

Taking the headlamp apart will be a lot of work. I used a pipe cleaner (fuzzy wire) inserted through the standing light hole (top outside corner) to remove a spider web from one of my headlamps and I hooked up a shop vac hose to the same hole to suck out any residual debris. Careful to round out the end of the pipe cleaner so you don't scratch the inside of the lens. Hope this helps?

 

sounds like a good idea. do i need to take the whole headlight out in oder to take the little light out? i havnt looked yet. let me knnow ahead of time, thank you soo much

 

Yes, much easier if you remove the headlight first. Good luck!

 

how do you remove the headlight? i only see the 2 top screws.

 

There's 2 more bolts in the bottom, remove the fog light splash shield to get get at 'em. Also, best to undue the bumper cover at the corner too and remove the grill. This way you can manipulate the headlamp to remove it without removing the bumper cover completely. Coincidently, gonna pop new headlamps in Beaner's car this afternoon!

 

god dam. screw that. is it possible to remove the little bulb on the upper corner without removing the whole head lamp?