I think those are called "Side Window Scoops".

Trust me, I know "scoops".

 

Well...not everyone.

But good suggestion for those of you driving automatics.

 

I'd like to see some billet aluminum switches anodized in black. I mean everything, the hvac temperature wheels and all.

 

Exactly! I had a set from a company on Canada that was aluminum. It had 4 plates with a small bolt welded in the middle of them. Super sticky taped them to each corner of the rear window. The louvers hade holes that lined up with the bolt plates and simply were held in place by wing nuts. You could put a thin brace down the inside to keep them from sagging too

It was a challange to lift it on and off myself but it was a 06 mustang, a XF would be a breeze for one guy to pop them off and on. I'll look for the company's name if it would help.


Pooly


I believe this is the link

http://spoilers4less.com/absplcarlob2.html

 

Over-all that's a cool looking side window scoop. Just a added suggestions to the design. Knowing that we already have a bad passenger blind spot,the tapered back end could use a little redesign. When in the car,you can't see the black trim paint that encircles our small rear side windows. So you could still keep the pointed tapered end that would cover the black glass trim paint. From the pointed back,just come towards the front about 1 1/2 inches then somewhat open up the scoop. You would have your view back for the passenger side and also you wouldn't cause air drag with the back being closed. Squirrel Crusher

 

Anybody interested in the front wing emblem (the wings themselves)? Another member needs them and it sounds like something I can do right away. I can make them out of fiberglass, and the more people want them the less money it will cost me; therefore the less it will cost the buyer. Either way I need to make a mold, which should hold up for 100 or so parts.
I didn't forget about the other ideas, in fact I'm working on an improved shifter. Still thinking about the louvers, and I don't know how comfortable I'd be making something to glue onto the glass. As for the switches/*****/buttons, I can make them for sure out of billet aluminum, anodized/powdercoated to any color, no problem. I just don't know how easily the stock ones come off.

 

all the switches just pop off with a pull. And I would like wing emblems the size of the one on the steering wheel. I've been looking all over for those, in chrome or brushed aluminum.

 

I would like a nice rear cargo roll cover. I have only seen one on this forum. The open cargo space bothers me. That's all. Nice and simple.

 

Me too .....

 

How about a front replacement grill which looks like this mock-up:

Message - CrossfireForum.org Gallery

I would buy one.

 

would anyone else be interested in polished aluminum headlight eyebrows? Opinions?

Still interested in underhood goodies/ oil filter cover?

 

Me three.....

 

I thank you for coming forward with this .... my wish is for someone to find out for sure whether an MB 32 roadsters' folding top could be adapted/modified and used on a xFire roadster. Probably not in your expertise but I know that this could be a desirable adaptation, and would have interest by some of us. Expensive? Probably .... but what an improvement.

 

Howard, I hate to say this, but have you taken a good look at the cars side by side, I do not think, without SERIOUS money and time, like more the XF is worth, to make something like this happen. We share many parts and some change over, but this is something I do not think will ever be done.

Sorry to poo in the punchbowl.

 

Without taking the time to study photos of SLK's and comparing them to photos of a Crossfire, wouldn't it just boil down to just one question?
Does the SLK use the same "A" pillar as the Crossfire, in other words, do they share a common windshield?

 

BooHoo .... just when I thought I'd contact Steve (32Krazy) and see if his top and guts from his wrecked 32 was available....... just wishing .....

 

I'd be interested in the wing emblem front and back powdercoated flat black if the price is right.

 

front wing emlem!

 

Agree! I like this idea.

 

If you can make new front and rear emblems that use the new Chrysler emblem for 2011 while filling in spaces from the old ones I would buy it.