Crossfire Coupe A place to discuss Coupe specific topics.
Sponsored by:
Sponsored by: CARiD

Reset Air Pressure

Thread Tools
 
Old Oct 19, 2011 | 04:04 PM
  #1 (permalink)  
aviram's Avatar
Thread Starter
Joined: Jun 2011
Posts: 27
Likes: 0
From: Israel
Default Reset Air Pressure

hello i would like to reset the air pressure\cancel this. How can i do that?
Thanks
 
Reply
Old Oct 19, 2011 | 04:23 PM
  #2 (permalink)  
Thirteendog's Avatar
Senior Member
Joined: Jul 2006
Posts: 3,610
Likes: 3
From: Lebanon, Tennessee
Default Re: Reset Air Pressure

Originally Posted by aviram
hello i would like to reset the air pressure\cancel this. How can i do that?
Thanks
Are you trying to say your Tire Pressure light is on and you'd like to turn it off?
 
Reply
Old Oct 19, 2011 | 04:34 PM
  #3 (permalink)  
Chris L.'s Avatar
Senior Member
Joined: Dec 2007
Posts: 2,228
Likes: 9
From: KC, Kansas
Default Re: Reset Air Pressure

Either add air to your tires or relocate to a warmer environment.
 
Reply
Old Oct 19, 2011 | 04:46 PM
  #4 (permalink)  
ala_xfire's Avatar
Senior Member
Joined: Dec 2010
Posts: 12,780
Likes: 184
From: Lineville, AL
Default Re: Reset Air Pressure

Originally Posted by Chris L.
Either add air to your tires or relocate to a warmer environment.
It don't get much hotter than Israel ........
 
Reply
Old Oct 19, 2011 | 04:54 PM
  #5 (permalink)  
oledoc2u's Avatar
Senior Member
Joined: Mar 2008
Posts: 14,599
Likes: 34
From: IN
Default Re: Reset Air Pressure

Originally Posted by aviram
hello i would like to reset the air pressure\cancel this. How can i do that?
Thanks
They are a pain in the ***. Either the unit itself is bad, or your air pressure is off. Equalize your tires to the correct air pressure.
 
Reply
Old Oct 19, 2011 | 06:13 PM
  #6 (permalink)  
IBLUBYU's Avatar
Senior Member
Joined: Mar 2010
Posts: 1,363
Likes: 2
From: Sun City West, AZ
Default Re: Reset Air Pressure

It is claimed that the TPMs have batteries that last for 10 years ..... but if one goes out, you'll never know which one, unless you replace them 1 at a time. A real pain in the A$$ and not reasonable. So ALL would have to be replaced. Better to just check your pressure regularly and put a small piece of black electrical tape over the light on the dash. Shalom
 
Reply
Old Oct 19, 2011 | 07:55 PM
  #7 (permalink)  
ala_xfire's Avatar
Senior Member
Joined: Dec 2010
Posts: 12,780
Likes: 184
From: Lineville, AL
Default Re: Reset Air Pressure

Rudy ( rcompart ) had posted this fix :

Easiest way to disable it is to remove the wire from pin 2 (red) and put it in pin 6 (blue). This will completely disable it and you will no longer have the light illuminate on the instrument cluster. This will not affect the HomeLink in any way so you don't lose that functionality.


To get at the TPMS/HomeLink connector, just remove the dome light and you can see the wires going into it. Remove the connector, use a pick or other fine tipped tool and depress the top of pin 2 so it will slide out. Push the pin back into the connector in the 6th position and reinstall the connector. Reinstall the dome light and you are finished.

( tried to copy the diagram, no luck. Search for the sticky "disable tpms" to see the diagram. )
 
Reply
Old Oct 19, 2011 | 08:33 PM
  #8 (permalink)  
Valk's Avatar
Administrator / Senior Member / Retired
Joined: Jul 2007
Posts: 18,059
Likes: 1,546
From: Aurora , ILL
Default Re: Reset Air Pressure

Originally Posted by alaxfire
Rudy ( rcompart ) had posted this fix :
https://www.crossfireforum.org/forum/537700-post3.html
 
Reply
Old Oct 20, 2011 | 01:29 AM
  #9 (permalink)  
aviram's Avatar
Thread Starter
Joined: Jun 2011
Posts: 27
Likes: 0
From: Israel
Default Re: Reset Air Pressure

thanks for the information. There's few crossfire here in Israel
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Valk
Interior
25
Jul 12, 2021 09:49 PM
TerryR
Cars For Sale - Archive
13
Dec 13, 2019 03:27 PM
Sweet2002
Crossfire SRT6
1
Sep 28, 2015 07:40 PM
stelrz1
Crossfire Coupe
2
Sep 21, 2015 11:18 AM
tritongreen
Troubleshooting & Technical Questions & Modifications
0
Sep 18, 2015 07:32 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 02:37 PM.