swap seat positions
swap seat positions
Hello all,
does anyone know if you can swap seat positions? driver to right side and passenger to left side. wonder if seat frame comes off of base unit leaving electrics, airbag, etc in the as configured location.
also, the passenger side controls don't all function. seat won't traverse forward nor up and down. any thoughts?
thanx,
jl
does anyone know if you can swap seat positions? driver to right side and passenger to left side. wonder if seat frame comes off of base unit leaving electrics, airbag, etc in the as configured location.
also, the passenger side controls don't all function. seat won't traverse forward nor up and down. any thoughts?
thanx,
jl
Re: swap seat positions
Hello all,
does anyone know if you can swap seat positions? driver to right side and passenger to left side. wonder if seat frame comes off of base unit leaving electrics, airbag, etc in the as configured location.
also, the passenger side controls don't all function. seat won't traverse forward nor up and down. any thoughts?
thanx,
jl
does anyone know if you can swap seat positions? driver to right side and passenger to left side. wonder if seat frame comes off of base unit leaving electrics, airbag, etc in the as configured location.
also, the passenger side controls don't all function. seat won't traverse forward nor up and down. any thoughts?
thanx,
jl
As far as your seat not working, could it be the relay?
https://www.crossfireforum.org/forum...t-problem.html
RL
Re: swap seat positions
If you're trying to balance out the wear, it might be easier to take it to an uphostery shop and see if they can remove the seat covers and swap them vs. trying to move the whole seats. As far as the controls not working on one, I'd check in this order: fuses, wiring at the switches and the switches themselves. If you can't see anything wrong on those, you may need to take it to a specialty auto electrical shop. I had a rear turn signal light on my truck that went out, and they found a pinch in the wiring harness inside the steering column that had to be replaced (sub harness). I would never have found that myself.
Re: swap seat positions
My cars with leather seats get hot, but my coupe is an SRT-6 which has suede seats and they don't do that.
Re: swap seat positions
not as nice as my alfa's but still very comfy.
Re: swap seat positions
Just spent about six hours behind the wheel and was comfortable. Of course I "fixed" mine to go about 2" further back (that allowed reclining), trimmed most of the side bolster off so the bottom cushion is essentially flat (cured hip pain), and removed the dead pedal pedestal (let left leg stretch out straight).
Re: swap seat positions
Just spent about six hours behind the wheel and was comfortable. Of course I "fixed" mine to go about 2" further back (that allowed reclining), trimmed most of the side bolster off so the bottom cushion is essentially flat (cured hip pain), and removed the dead pedal pedestal (let left leg stretch out straight).
Would it make sense to go to an orthopedic clinic and get some things fixed instead of ripping up the car? One inexpensive thing you can do, is, if you have a recliner at home, throw it out, they are one of the worst things to have if you have hip and back problems. They are NOT designed by orthopedic engineers.
Thread
Thread Starter
Forum
Replies
Last Post
RED DOG
-C-I-C-C-I Discussion
1
10-08-2015 09:28 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)