Crossfire Coupe A place to discuss Coupe specific topics.
Sponsored by:
Sponsored by: CARiD

shift knob

Thread Tools
 
Old May 8, 2013 | 01:32 AM
  #1 (permalink)  
Bloo Ize's Avatar
Thread Starter
Joined: Dec 2008
Posts: 97
Likes: 0
From: Washington State
Default shift ****

looking for a shift **** for my 2005 base coupe...manual transmission...Chrysler told me I needed to purchase the whole gear shift lever for $315.20...typical...anyone have a spare out there they want to sell? just the ****?
 
Reply
Old May 8, 2013 | 08:20 AM
  #2 (permalink)  
smfrycruzr's Avatar
Senior Member
Joined: Nov 2008
Posts: 1,312
Likes: 12
Default Re: shift ****

Hello there in Washington State!
I've got the one left over from when I changed mine out for my custom ****.
Send me a PM and we can work out the shipping.
smfry
 
Reply
Old May 8, 2013 | 10:49 AM
  #3 (permalink)  
BoilerUpXFire's Avatar
Senior Member
Joined: Jan 2009
Posts: 6,285
Likes: 5
From: Carmel, In.
Default Re: shift ****

I am sure Terry will get you taken care of, but if anyone else needs a ****, I have an OEM one available as well...
 
Reply
Old May 8, 2013 | 08:00 PM
  #4 (permalink)  
crossfireracr's Avatar
Forum Regular
Joined: Sep 2011
Posts: 387
Likes: 1
Default Re: shift ****

I just bought the StarTech **** off a member here a few days ago and will have my stock one available aswell
 
Reply
Old May 8, 2013 | 08:43 PM
  #5 (permalink)  
dtinker's Avatar
Senior Member
Joined: Nov 2008
Posts: 1,577
Likes: 1
From: Houston, Texas
Default Re: shift ****

Bloo Ize:

If i had a spare i would give it to you. If I hear of one around I'll pass it on. did yours get broken or stolen??
 
Reply
Old May 12, 2013 | 08:28 PM
  #6 (permalink)  
Bloo Ize's Avatar
Thread Starter
Joined: Dec 2008
Posts: 97
Likes: 0
From: Washington State
Default Re: shift ****

Originally Posted by dtinker
Bloo Ize:

If i had a spare i would give it to you. If I hear of one around I'll pass it on. did yours get broken or stolen??
no...it has/had a paint defect...that over the years has gotten worse...looked like maybe a small bubble.. then it popped and cracked....just looks nasty and I have a car meet coming up...so am pimping my baby out needed to replace it and no way was I going to pay chrysler $315 for the entire gear shift lever...and i'm trying to keep my car as stock as possible...
 
Reply
Old May 12, 2013 | 08:29 PM
  #7 (permalink)  
Bloo Ize's Avatar
Thread Starter
Joined: Dec 2008
Posts: 97
Likes: 0
From: Washington State
Default Re: shift ****

Originally Posted by crossfireracr
I just bought the StarTech **** off a member here a few days ago and will have my stock one available aswell
Thank you..i have one coming, but if it falls through I will look you up...
 
Reply
Old May 12, 2013 | 08:30 PM
  #8 (permalink)  
Bloo Ize's Avatar
Thread Starter
Joined: Dec 2008
Posts: 97
Likes: 0
From: Washington State
Default Re: shift ****

Originally Posted by BoilerUpXFire
I am sure Terry will get you taken care of, but if anyone else needs a ****, I have an OEM one available as well...
lol...next time I will ask you first...I swear.
 
Reply
Old May 12, 2013 | 08:40 PM
  #9 (permalink)  
SNAKEWOLF's Avatar
Joined: May 2008
Posts: 234
Likes: 0
Default Re: shift ****

PM the cost of shift ****
 
Reply
Old May 13, 2013 | 02:38 AM
  #10 (permalink)  
dtinker's Avatar
Senior Member
Joined: Nov 2008
Posts: 1,577
Likes: 1
From: Houston, Texas
Default Re: shift ****

hope you have found at least a temp replacement. Have you thought about a good refinish of the one you have. I think it could be filled sanded and refinished to look like new. I would be glad to give it a try, let me know!
 
Reply
Old May 13, 2013 | 10:22 AM
  #11 (permalink)  
SNAKEWOLF's Avatar
Joined: May 2008
Posts: 234
Likes: 0
Default Re: shift ****

Thanks for the offer just thought that I would pick one up for spare.
 
Reply
Old May 13, 2013 | 03:32 PM
  #12 (permalink)  
smfrycruzr's Avatar
Senior Member
Joined: Nov 2008
Posts: 1,312
Likes: 12
Default Re: shift ****

Hey Bloo,
It's on the way!!
Plus a surprise......
 
Reply
Old May 14, 2013 | 11:58 PM
  #13 (permalink)  
Bloo Ize's Avatar
Thread Starter
Joined: Dec 2008
Posts: 97
Likes: 0
From: Washington State
Default Re: shift ****

Originally Posted by dtinker
hope you have found at least a temp replacement. Have you thought about a good refinish of the one you have. I think it could be filled sanded and refinished to look like new. I would be glad to give it a try, let me know!
Yes...I was going to try that...I have some of that Wurth silver paint for my rims...am assuming it isa pretty close match to the **** paint...haven't checked into it too much...a future project...one of many
 
Reply
Old May 14, 2013 | 11:59 PM
  #14 (permalink)  
Bloo Ize's Avatar
Thread Starter
Joined: Dec 2008
Posts: 97
Likes: 0
From: Washington State
Default Re: shift ****

Originally Posted by smfrycruzr
Hey Bloo,
It's on the way!!
Plus a surprise......
hmmm...that worries me...I don't like surprises...lol...
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Valk
Interior
25
Jul 12, 2021 09:49 PM
crossfireusa
Engine, Exhaust, Transmission and Differential
6
Oct 28, 2015 12:03 AM
jimf
Troubleshooting & Technical Questions & Modifications
11
Oct 10, 2015 10:22 AM
Crossfireone
Parts/Accessories for sale - Archive
23
Aug 25, 2015 04:56 AM
Cuda56
Parts/Accessories for sale - Archive
1
Aug 11, 2015 12:11 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 01:44 PM.