Hello i would like to reset the service indicator call with the -600 miles.
How can i do that?
i tried sevral times to reset this with the key hold and press ***.No luck with this issue.

 

Search "FSS Reset", you are missing a few steps.

This should do it:
1. Turn key to the ON/Run position.

2. Within one second press the ****/button twice.

3. The present status for days or distance is displayed. Within 10 seconds turn the key to OFF.

4. Press and hold the ****/button, while turning the key to ON/RUN again. The present status for days or distance is displayed once more. Continue to hold the ****/button.

After approximately 10 seconds, a signal sounds and the display shows 7,000 miles for approximately 10 seconds.

5. Release the ****/button.

 

Hello pizzaguy. Thank you for the information. I'll try to do this.

 

IT can be tricky, might take a few tries.

 

And yes you have to be quick in doing it !!!! Sometimes it works on the 1st try for me !!!!! Other times it takes 2 to 3 times to get it !!!! Good luck !!!!!

 

Thanks Pizza guy! Took 3 times doing it the exact same way, but finally reset. I had the clock, wrench -38 on my display