Resetting the oil change mileage
Thread Starter
Joined: Feb 2014
Posts: 3
Likes: 0
From: Chicago
Resetting the oil change mileage
I bought the car and just changed the oil for the first time and I can not reset the FFS that says I'm over my mileage
Any thoughts
I followed the steps in the owners manual with no success
Any thoughts
I followed the steps in the owners manual with no success
Administrator / Senior Member / Retired
Joined: Jul 2007
Posts: 18,104
Likes: 1,597
From: Aurora , ILL
Re: Resetting the oil change mileage
It will work but sometimes it takes a couple of tries
RESETTING THE FSS MAINTENANCE INDICATOR AFTER AN OIL CHANGE
1) Move the ignition switch to the “RUN” position
2) Within 4 seconds of moving the ignition switch into the “RUN” position, press the reset button for the trip odometer
twice within one second
The display for the FSS service request is activated for 10 seconds
3) During the 10 seconds the FSS service request is displayed, move the ignition switch to the “OFF” position
The FSS service request will continue to be displayed
4) Press the reset button for the trip odometer and hold
5) Move the ignition switch to the “RUN” position
6) Continue to press and hold the reset button for the trip odometer (about 10 seconds) until the audible signal
sounds and the new start distance appears in the display
The tool symbol should disappear at this time
RESETTING THE FSS MAINTENANCE INDICATOR AFTER AN OIL CHANGE
1) Move the ignition switch to the “RUN” position
2) Within 4 seconds of moving the ignition switch into the “RUN” position, press the reset button for the trip odometer
twice within one second
The display for the FSS service request is activated for 10 seconds
3) During the 10 seconds the FSS service request is displayed, move the ignition switch to the “OFF” position
The FSS service request will continue to be displayed
4) Press the reset button for the trip odometer and hold
5) Move the ignition switch to the “RUN” position
6) Continue to press and hold the reset button for the trip odometer (about 10 seconds) until the audible signal
sounds and the new start distance appears in the display
The tool symbol should disappear at this time
Last edited by Valk; Feb 27, 2014 at 08:41 PM.
Forum Regular
Joined: Jul 2010
Posts: 484
Likes: 0
From: Richmond, Ont.
Re: Resetting the oil change mileage
As above - and you've gotta be quick! Be within the few seconds given and it will work. If it doesn't, keep following the instructions until it does.
Senior Member
Joined: Mar 2010
Posts: 1,157
Likes: 1
From: midwest
Re: Resetting the oil change mileage
make sure you follow the manual & do all the steps in a row & do them fast !!! I did it once the 1st time most of the time two or three tries !!!
Thread
Thread Starter
Forum
Replies
Last Post
skeet370
Troubleshooting & Technical Questions & Modifications
5
Jul 18, 2015 01:02 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)