My Balls Deep Crazy Project
I'm going to put a thin marine (water-proof) speaker right behind the crossfire's grill, i will have it powered by an amp/receiver unit that will have a hand-set mic connected to it. Basically i'll be able to sit in the cab of my roadster and use the handset to talk to everyone outside -- they'll hear me really loudly.
My cousin did this to his Chevy Tahoe and I've always wanted to do this for the sheer fun of being able to drive on the highway and comment on other people's cars while we're doing 90 mph and have them hear every word I say.
I get a kick out of that.
I'll keep you guys updated on the project. Total component costs should be under $200 but the install might be $150-$400 depending on what they have to do. I'm having a local shop do it.
- Julian
My cousin did this to his Chevy Tahoe and I've always wanted to do this for the sheer fun of being able to drive on the highway and comment on other people's cars while we're doing 90 mph and have them hear every word I say.
I get a kick out of that.
I'll keep you guys updated on the project. Total component costs should be under $200 but the install might be $150-$400 depending on what they have to do. I'm having a local shop do it.
- Julian
Last edited by nitro4; Jan 28, 2007 at 03:31 PM.
Maybe two thin speakers, something like this:
http://cgi.ebay.com/ebaymotors/NEW-S...75590266QQrdZ1
OR
I might skip the mixer and the amp and just go with a bullhorn, mount it hidden in the fender somewhere, and then extend the hand unit so it reaches the cab of the crossfire, something like this:
http://cgi.ebay.com/50-Watt-Commerci...QQcmdZViewItem
http://cgi.ebay.com/ebaymotors/NEW-S...75590266QQrdZ1
OR
I might skip the mixer and the amp and just go with a bullhorn, mount it hidden in the fender somewhere, and then extend the hand unit so it reaches the cab of the crossfire, something like this:
http://cgi.ebay.com/50-Watt-Commerci...QQcmdZViewItem
Last edited by nitro4; Jan 28, 2007 at 03:46 PM.
Thread
Thread Starter
Forum
Replies
Last Post
jimf
Troubleshooting & Technical Questions & Modifications
11
Oct 10, 2015 10:22 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



