Need a 2005 Crossefire CD for the GPS
Joined: Mar 2010
Posts: 3
Likes: 0
Re: Need a 2005 Crossefire CD for the GPS
There are several NAV systems. Each requires a specific set of CDs because the software is different.
Post your
Brand
Model#
Example: Pioneer Model# AVIC-N4
If you Google the Brand & model, you might get more info.
Post your
Brand
Model#
Example: Pioneer Model# AVIC-N4
If you Google the Brand & model, you might get more info.
Senior Member
Joined: Mar 2008
Posts: 1,422
Likes: 4
From: IL
Re: Need a 2005 Crossefire CD for the GPS
Originally Posted by BruceIDE
There are several NAV systems. Each requires a specific set of CDs because the software is different.
Post your
Brand
Model#
Example: Pioneer Model# AVIC-N4
If you Google the Brand & model, you might get more info.
Post your
Brand
Model#
Example: Pioneer Model# AVIC-N4
If you Google the Brand & model, you might get more info.
Joined: Mar 2010
Posts: 3
Likes: 0
Re: Need a 2005 Crossefire CD for the GPS
[quote=Mike-in-Orange]UPDATE: As of 8.31.2007 these seem to be working. Please read all notes below.
These disks are for the Infinity Modulus System only, they will not work in other NAV systems. So to share the wealth, so to speak, I have both sets of files sitting on my FTP server and links to both right here:
East Region Nav CD (622MB)
West Region Nav CD (467MB)
Be warned, the files are quite large and are in .ISO format. The following instructions should result in working disks - I tested both methods and produced working disks both ways.
Make sure to use the correct media for this project: CD-R media is the ONLY media that will work. CD-RW discs or DVD media of any type will not work in your Crossfire's NAV unit.
Windows Computers:
Using Nero Burning ROM:
1. Launch Nero and close out the "New Compilation" popup window
2. Select "File" > "Open"
3. From the "Types of Files" selector, choose "Image Files (*.nrg, *.iso, *.cue)" and then browse to the file you downloaded (either XFIRE_USA_0015.1.iso or XFIRE_USA_0015.2.iso) and select it. NOTE: you will not be able to browse to the file until you have chosen the correct file type from the dropdown menu
4. From the "Burn" tab, select "Finalize CD (No further writing possible)" and next to "Write method" select "Disc-at-once"
5. Select "Burn"
6. Once burning is complete the disk should be useable in your NAV system
quote]
Nero - Nero - free downloads - latest updates and trial versions
Thread
Thread Starter
Forum
Replies
Last Post
steps
Troubleshooting & Technical Questions & Modifications
2
Sep 12, 2015 09:23 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)