does anyone have a ecu that i can have
does anyone have a ecu that i can have
I would like a ecu (computer) from a wreaked, (Totaled) srt-6 I need it so i can have a freind explore it and maybe find ways to increase fuel, increase power, increase mpg and make the tranny shift when you want it to both manul and with the slap stick, and other things thanks jim
Re: does anyone have a ecu that i can have
there are 2 regular crossfire ecu's on ebay but no srt6
call inmotion tuning to see if he can reflash them so they are the same as the srt6
http://cgi.ebay.com/ebaymotors/05-Ch...Q5fAccessories
http://cgi.ebay.com/ebaymotors/2004-...Q5fAccessories
I think the transmission is controlled by the seperate computer TCU
at least that is how it is on most cars.
call inmotion tuning to see if he can reflash them so they are the same as the srt6
http://cgi.ebay.com/ebaymotors/05-Ch...Q5fAccessories
http://cgi.ebay.com/ebaymotors/2004-...Q5fAccessories
I think the transmission is controlled by the seperate computer TCU
at least that is how it is on most cars.
Re: does anyone have a ecu that i can have
Originally Posted by mrphotoman
there are 2 regular crossfire ecu's on ebay but no srt6
call inmotion tuning to see if he can reflash them so they are the same as the srt6
I think the transmission is controlled by the seperate computer TCU
at least that is how it is on most cars.
call inmotion tuning to see if he can reflash them so they are the same as the srt6
I think the transmission is controlled by the seperate computer TCU
at least that is how it is on most cars.
Re: does anyone have a ecu that i can have
Originally Posted by amx1397
thanks j fire,,, I found two srt-6 in a junk yard just 7 miles from my house..
be careful giving credit card info to some of them though.... i had my CC numbers sold to someone by one of those shops. might want to pay there, or send a check!
Re: does anyone have a ecu that i can have
Originally Posted by amx1397
thanks j fire,,, I found two srt-6 in a junk yard just 7 miles from my house..they want way too much for the ecu 400.00 ,, I need one to play with.
Join Date: Mar 2008
Location: NORTH RICHLAND HILLS,TX
Age: 47
Posts: 539
Likes: 0
Received 3 Likes
on
2 Posts
Join Date: Mar 2008
Location: NORTH RICHLAND HILLS,TX
Age: 47
Posts: 539
Likes: 0
Received 3 Likes
on
2 Posts
Join Date: Mar 2008
Location: NORTH RICHLAND HILLS,TX
Age: 47
Posts: 539
Likes: 0
Received 3 Likes
on
2 Posts
Guest
Posts: n/a
Re: does anyone have a ecu that i can have
The N/A motor runs BOSCH ME 2.8 ECU, SRT6 runs BOSCH 2.8.1, these are not interchangeable.
If you are reading the ECU out of the car you will need some debugging software and a BDM tool.
If you need some help with sourcing this stuff just let me know and I'd be more then happy to help.
If you are reading the ECU out of the car you will need some debugging software and a BDM tool.
If you need some help with sourcing this stuff just let me know and I'd be more then happy to help.
Re: does anyone have a ecu that i can have
Originally Posted by TVT_DESIGN
The N/A motor runs BOSCH ME 2.8 ECU, SRT6 runs BOSCH 2.8.1, these are not interchangeable.
If you are reading the ECU out of the car you will need some debugging software and a BDM tool.
If you need some help with sourcing this stuff just let me know and I'd be more then happy to help.
If you are reading the ECU out of the car you will need some debugging software and a BDM tool.
If you need some help with sourcing this stuff just let me know and I'd be more then happy to help.
Re: does anyone have a ecu that i can have
In order to reverse-engineer an ECM, what has been done on other makes has been to read the contents of the memory (in some cases it's on a removeable chip) and use a de-assembler to determine what the code started out as. You will need to know what processor is in the ECM - hopefully it's a standard microprocessor and not some custom OEM-specific version. The de-assembler turns the machine-level instructions into readable code (if you understand machine language). And of course you will have to separate data from instructions, a symbol table really helps there. An ECM bench also makes the process a little more manageable.
Thread
Thread Starter
Forum
Replies
Last Post
minimayhem
Engine, Exhaust, Transmission and Differential
17
01-19-2016 02:10 PM
psuperti
Cars For Sale - Archive
0
08-30-2015 12:08 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)