Crossfire SRT6 A place to discuss SRT-6 specific topics.

Need help please

Thread Tools
 
Old Feb 4, 2014 | 11:29 PM
  #1 (permalink)  
fastfred's Avatar
Thread Starter
|
Forum Regular
Joined: Apr 2011
Posts: 308
Likes: 3
From: Placerville Calif.
Default Need help please

my key fob would not work so i went changed the battery's Manuel in glove box so i open the door and ya the alarm went off.... tryed to open the car with the new battery's nothing... so i get my 2nd fob from my wife and hers will not work .....my dash lights go on when i put the key in to start it but nothing at all ....head lights work fine so battery in can is good ....HELP....any info would help me i have been stuck at the parking Lot for hours..
 
Reply
Old Feb 4, 2014 | 11:31 PM
  #2 (permalink)  
Mrmiata's Avatar
Senior Member
Joined: Sep 2011
Posts: 9,595
Likes: 26
From: Kellyville, Ok
Default Re: Need help please

it's worth a shot.. disconnect your battery from the car.. give it a couple minutes.. even turn the ignition to the on position.. then turn off and reconnect the battery. Basically resetting all the electronics.
 
Reply
Old Feb 5, 2014 | 12:02 AM
  #3 (permalink)  
fastfred's Avatar
Thread Starter
|
Forum Regular
Joined: Apr 2011
Posts: 308
Likes: 3
From: Placerville Calif.
Default Re: Need help please

Originally Posted by Mrmiata
it's worth a shot.. disconnect your battery from the car.. give it a couple minutes.. even turn the ignition to the on position.. then turn off and reconnect the battery. Basically resetting all the electronics.
disconnected the pos. and nav. and the alarm is still going on????
 
Reply
Old Feb 5, 2014 | 12:03 AM
  #4 (permalink)  
Mrmiata's Avatar
Senior Member
Joined: Sep 2011
Posts: 9,595
Likes: 26
From: Kellyville, Ok
Default Re: Need help please

there is a back up battery in the alarm module itself.
 
Reply
Old Feb 5, 2014 | 12:05 AM
  #5 (permalink)  
fastfred's Avatar
Thread Starter
|
Forum Regular
Joined: Apr 2011
Posts: 308
Likes: 3
From: Placerville Calif.
Default Re: Need help please

it finley stoped after about 2mins of no battery and still working going to rehook the battery and give your idea a shot...
 
Reply
Old Feb 5, 2014 | 12:10 AM
  #6 (permalink)  
fastfred's Avatar
Thread Starter
|
Forum Regular
Joined: Apr 2011
Posts: 308
Likes: 3
From: Placerville Calif.
Default Re: Need help please

OK car started OK but my key fob nor my wifes key fob will not work is there a way to reset a key fob i read the book that comes with the car it says hit unlock 2 times put key in the on position and it should reset but it did not.....
 
Reply
Old Feb 5, 2014 | 12:11 AM
  #7 (permalink)  
Mrmiata's Avatar
Senior Member
Joined: Sep 2011
Posts: 9,595
Likes: 26
From: Kellyville, Ok
Default Re: Need help please

Great.. glad she started.. batteries in her fob by chance?
 
Reply
Old Feb 5, 2014 | 12:13 AM
  #8 (permalink)  
Mrmiata's Avatar
Senior Member
Joined: Sep 2011
Posts: 9,595
Likes: 26
From: Kellyville, Ok
Default Re: Need help please

The only method I know of is what's in the manual.
 
Reply
Old Feb 5, 2014 | 12:15 AM
  #9 (permalink)  
Mrmiata's Avatar
Senior Member
Joined: Sep 2011
Posts: 9,595
Likes: 26
From: Kellyville, Ok
Default Re: Need help please

Off to bed.. hope she gets you home okay.. please update us with things.
 
Reply
Old Feb 5, 2014 | 12:16 AM
  #10 (permalink)  
fastfred's Avatar
Thread Starter
|
Forum Regular
Joined: Apr 2011
Posts: 308
Likes: 3
From: Placerville Calif.
Default Re: Need help please

ya that was funny stuff no battery and it was still going.......tryed to reset key fobs no luck im going to drive this can home now ...thank you for your idea and i guss i check in on wed. to see if anyone knows how to reset keyfobs....whats in their book does not work...have a good nit ya all this web site has helped me so meny times i wish i could take you all out for a beer and say thank you....
 
Reply

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 10:35 PM.