Srt 6 decision.
Srt 6 decision.
Hi all,
I am thinking of purchases SRT6 from the insurance auction in West Virginia at Buckhannon Branch on Nov 4th.
The VIN is 1C3AN79N05X040174.
It is low in mile which is 12,653 however looking from the photos, both the front wheels are facing opposite direction.
How much would be the appropriate price to get it off the auction?
and how much cost is assumed for the repair?
I was just wondering whether it would be worth investing and rebuilding not for sale purpose.
This is the link: https://www.iaai.com/Vehicles/Vehicl...oadRecent=True
I would really want to grab this one.
Thank you for the kind attention and help.
I am thinking of purchases SRT6 from the insurance auction in West Virginia at Buckhannon Branch on Nov 4th.
The VIN is 1C3AN79N05X040174.
It is low in mile which is 12,653 however looking from the photos, both the front wheels are facing opposite direction.
How much would be the appropriate price to get it off the auction?
and how much cost is assumed for the repair?
I was just wondering whether it would be worth investing and rebuilding not for sale purpose.
This is the link: https://www.iaai.com/Vehicles/Vehicl...oadRecent=True
I would really want to grab this one.
Thank you for the kind attention and help.
Only 12,xxx miles, nice
It is the right color.
Both wheels look good from the pics.
Looks like it ran over something.
Great find for a rescue.
Bumper cover.
Drivers fender.
Upper & lower control arms and ball joints.
Tie rods.
Windshield.
Dash or a dash cover.
Possibly sway bar.
Frame looks fine, just pushed the fender back alittle possibly.
It is the right color.
Both wheels look good from the pics.
Looks like it ran over something.
Great find for a rescue.
Bumper cover.
Drivers fender.
Upper & lower control arms and ball joints.
Tie rods.
Windshield.
Dash or a dash cover.
Possibly sway bar.
Frame looks fine, just pushed the fender back alittle possibly.
Only 12,xxx miles, nice
It is the right color.
Both wheels look good from the pics.
Looks like it ran over something.
Great find for a rescue.
Bumper cover.
$400 new unpainted
Drivers fender.
$295 used in same ssb color.
Upper & lower control arms and ball joints.
$174 upper and lower and joints.
Tie rods.
$174 tie rods and center drag link
Windshield.
$ ?????
Dash or a dash cover.
Suede dash mat $56
Possibly sway bar.
$300 h&r sway bar upgrade
Frame looks fine, just pushed the fender back alittle possibly.
Can anyone think of anything else could need replaced from the pics?
It is the right color.
Both wheels look good from the pics.
Looks like it ran over something.
Great find for a rescue.
Bumper cover.
$400 new unpainted
Drivers fender.
$295 used in same ssb color.
Upper & lower control arms and ball joints.
$174 upper and lower and joints.
Tie rods.
$174 tie rods and center drag link
Windshield.
$ ?????
Dash or a dash cover.
Suede dash mat $56
Possibly sway bar.
$300 h&r sway bar upgrade
Frame looks fine, just pushed the fender back alittle possibly.
Can anyone think of anything else could need replaced from the pics?
Re: Srt 6 decision.
Looks like it spun after impact from the marks on the passenger side rear. Going to need a minimum 1 fog light. Odds are good the mounting tabs for the headlights snapped. Probably needs a new heat exchanger from the look of that front blow. Perfect parts/transplant candidate since it's the worst color....old man blue. I would say try to find a previously repaired car if you want one cheap, otherwise you'll spend a lot of unnecessary $$$.
Join Date: Jul 2015
Location: Pittsburgh, PA
Age: 60
Posts: 945
Likes: 0
Received 4 Likes
on
4 Posts
Could just be a broken tie rod.
Or a tie rod and contol arm, brackets could be ok.
And at best $175 - $350 to just get it going, then work on the rest.
I have watched afew srt6 in ALOT better shape sell around $1000 -$1,600 with 40 k to 100 k miles but with only 12 k miles on this one would be worth a rescue.
I am guessing it will sell around $2,000 maybe $2,500
Thread
Thread Starter
Forum
Replies
Last Post
cdcrone123
Troubleshooting & Technical Questions & Modifications
1
08-04-2015 06:37 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)