My SRT6 dressed up on Tuxedo
Well guys, I just dressed up my SRT6 with new AMG wheels 19x8.5 & 19x9.5 in the rear. On order to mention some of the mods completed; the car now sits 1.3" lower on German made Vogland springs and F1 Fabrication adjustable cambers. I replaced the stock brake disc with drilled/spotted units. The front end also got a nice personalized treatment with a custom made bumper splitter, Crossfire lettering in the front grille and LED stripes inside the headlights.
That last mod mentioned was really tough to get it done because it was very difficult to open the headlight casing so I can run the LED strips and put them on place. Anyways, I ended up cutting the whole case because no matter how much time I leave the headlights in the oven heating up, the glue didn't get loose at all. Anyway, I was able to re-seal the headlights back again, which was another tedious process but it worked at the end. Well, I hope you guys enjoy my SRT6 pics. I still have a few more things on mind but I just wanted to show you guys my progress! https://cimg1.ibsrv.net/gimg/www.cro...baa908988e.jpg https://cimg1.ibsrv.net/gimg/www.cro...db3eddbe3f.jpg https://cimg2.ibsrv.net/gimg/www.cro...9327e34132.jpg https://cimg6.ibsrv.net/gimg/www.cro...ca6a2b403f.jpg https://cimg9.ibsrv.net/gimg/www.cro...be60179d33.jpg |
Re: My SRT6 dressed up on Tuxedo
Looks very nice! The front spliter looks a lot like a Viper front.
Jim |
Re: My SRT6 dressed up on Tuxedo
That is a very nice looking car. You certainly have good craftsmanship. Enjoy the ride!
|
Re: My SRT6 dressed up on Tuxedo
a.romdiaz,
Nice subtle touches. I think you hit a homerun with not only lowering the front, but adding that custom front splitter "makes it". Nice work! Kudoos to you! Regards, |
Re: My SRT6 dressed up on Tuxedo
Very nice job....Squirrel Crusher
|
Re: My SRT6 dressed up on Tuxedo
Hey squirrel crusher, love the idea on the headlights. Where did you find the LED strip lights? looks amazing. Whole car, perfect.
|
Re: My SRT6 dressed up on Tuxedo
Killed it!!!...looks great!!
|
Re: My SRT6 dressed up on Tuxedo
Ride looks really nice!!!
|
Re: My SRT6 dressed up on Tuxedo
Man, beautiful!! One sweet ride!!
|
Re: My SRT6 dressed up on Tuxedo
Beautiful car! What offsets are the wheels because they look perfect. I’m also wondering if you had to use spacers to achieve figment.
|
Re: My SRT6 dressed up on Tuxedo
Wow, looks great!
|
Re: My SRT6 dressed up on Tuxedo
Simply Stunning! How much did that front splitter run for? :p
|
Re: My SRT6 dressed up on Tuxedo
https://cimg0.ibsrv.net/gimg/www.cro...75277ca73c.jpg
https://cimg2.ibsrv.net/gimg/www.cro...dc6ac657a4.jpg https://cimg5.ibsrv.net/gimg/www.cro...a65791d278.jpg Now looking better with carbon fiber rear bumper spats and side splitters! |
Re: My SRT6 dressed up on Tuxedo
Car continues to look sharp!! :)
|
Re: My SRT6 dressed up on Tuxedo
Originally Posted by a.romdiaz
(Post 924584)
https://cimg0.ibsrv.net/gimg/www.cro...75277ca73c.jpg
https://cimg2.ibsrv.net/gimg/www.cro...dc6ac657a4.jpg https://cimg5.ibsrv.net/gimg/www.cro...a65791d278.jpg Now looking better with carbon fiber rear bumper spats and side splitters! |
Re: My SRT6 dressed up on Tuxedo
Originally Posted by austinbarrylee
(Post 924631)
Where did u get front and rear. Thanks
|
Re: My SRT6 dressed up on Tuxedo
Originally Posted by a.romdiaz
(Post 924636)
The front splitter is a combination of two splitter sets I bough on eBay. Basically, I only used the two side splitters from one set and the center part section from the other set. The rear ones are the Hyundai Veloster carbon fiber spats. They fit perfectly on the Crossfire.
|
Re: My SRT6 dressed up on Tuxedo
Originally Posted by a.romdiaz
(Post 924636)
The front splitter is a combination of two splitter sets I bough on eBay. Basically, I only used the two side splitters from one set and the center part section from the other set. The rear ones are the Hyundai Veloster carbon fiber spats. They fit perfectly on the Crossfire.
|
Re: My SRT6 dressed up on Tuxedo
https://cimg4.ibsrv.net/gimg/www.cro...7f70a393ed.jpg
That's an awesome car for sure. Not being critical, but I think the splitters/spoilers would look a lot more complete if they were painted body color. |
Re: My SRT6 dressed up on Tuxedo
Do you have a picture of the rear of your car you could post? I was just curious what the Veloster splitters look like. Thank you in advance.
|
All times are GMT -4. The time now is 07:59 AM. |
© 2024 MH Sub I, LLC dba Internet Brands