My SRT6 dressed up on Tuxedo
My SRT6 dressed up on Tuxedo
Well guys, I just dressed up my SRT6 with new AMG wheels 19x8.5 & 19x9.5 in the rear. On order to mention some of the mods completed; the car now sits 1.3" lower on German made Vogland springs and F1 Fabrication adjustable cambers. I replaced the stock brake disc with drilled/spotted units. The front end also got a nice personalized treatment with a custom made bumper splitter, Crossfire lettering in the front grille and LED stripes inside the headlights.
That last mod mentioned was really tough to get it done because it was very difficult to open the headlight casing so I can run the LED strips and put them on place. Anyways, I ended up cutting the whole case because no matter how much time I leave the headlights in the oven heating up, the glue didn't get loose at all. Anyway, I was able to re-seal the headlights back again, which was another tedious process but it worked at the end.
Well, I hope you guys enjoy my SRT6 pics. I still have a few more things on mind but I just wanted to show you guys my progress!
That last mod mentioned was really tough to get it done because it was very difficult to open the headlight casing so I can run the LED strips and put them on place. Anyways, I ended up cutting the whole case because no matter how much time I leave the headlights in the oven heating up, the glue didn't get loose at all. Anyway, I was able to re-seal the headlights back again, which was another tedious process but it worked at the end.
Well, I hope you guys enjoy my SRT6 pics. I still have a few more things on mind but I just wanted to show you guys my progress!
The following users liked this post:
Samholzer84 (02-16-2022)
Re: My SRT6 dressed up on Tuxedo
The front splitter is a combination of two splitter sets I bough on eBay. Basically, I only used the two side splitters from one set and the center part section from the other set. The rear ones are the Hyundai Veloster carbon fiber spats. They fit perfectly on the Crossfire.
Re: My SRT6 dressed up on Tuxedo
The front splitter is a combination of two splitter sets I bough on eBay. Basically, I only used the two side splitters from one set and the center part section from the other set. The rear ones are the Hyundai Veloster carbon fiber spats. They fit perfectly on the Crossfire.
Re: My SRT6 dressed up on Tuxedo
The front splitter is a combination of two splitter sets I bough on eBay. Basically, I only used the two side splitters from one set and the center part section from the other set. The rear ones are the Hyundai Veloster carbon fiber spats. They fit perfectly on the Crossfire.
Join Date: Mar 2005
Location: Austin, Texas, USA
Age: 63
Posts: 72
Received 0 Likes
on
0 Posts