Crossfire SRT6 A place to discuss SRT-6 specific topics.

Halfshaft

Old Jul 22, 2019 | 05:48 AM
  #1 (permalink)  
JEFASOLD's Avatar
Thread Starter
|
Senior Member
Joined: Aug 2012
Posts: 1,709
Likes: 10
Default Halfshaft

Need a little help i've been reduced to using an older computer and am searching for an srt6 halfshaft assembly. Can anyone drop a link for an inexpensive one for me.i am desperate to get my car back on the road before i die. I am not doing well, had 4th strokelost 83 lbs and can only walk with assistance. Thanks to everyone here. It has been an honor to have made your acquaintance.
 
Reply
Old Jul 22, 2019 | 06:05 AM
  #2 (permalink)  
ala_xfire's Avatar
Senior Member
Joined: Dec 2010
Posts: 12,780
Likes: 184
From: Lineville, AL
Default Re: Halfshaft

Here's a left side one :
https://www.ebay.com/i/233123669941?...8aAqRwEALw_wcB

Here's both of 'em :
https://www.redlineautoparts.com/chr...ts-pair-cf009/
 

Last edited by ala_xfire; Jul 22, 2019 at 06:10 AM.
Reply
Old Jul 22, 2019 | 06:09 PM
  #3 (permalink)  
dinasrt's Avatar
Senior Member
Joined: Apr 2010
Posts: 2,404
Likes: 8
From: Mendocino, CA
Default Re: Halfshaft

Originally Posted by JEFASOLD
Need a little help i've been reduced to using an older computer and am searching for an srt6 halfshaft assembly. Can anyone drop a link for an inexpensive one for me.i am desperate to get my car back on the road before i die. I am not doing well, had 4th strokelost 83 lbs and can only walk with assistance. Thanks to everyone here. It has been an honor to have made your acquaintance.
Are you able to still drive? If so, the good news is that you'll fit in it a lot better! (thought you could use the chuckle) Very sorry to hear about your plight; hang in there. Very honored to have followed along with you as well, here on this great forum.
 
Reply
Old Jul 22, 2019 | 08:01 PM
  #4 (permalink)  
JEFASOLD's Avatar
Thread Starter
|
Senior Member
Joined: Aug 2012
Posts: 1,709
Likes: 10
Default Re: Halfshaft

Originally Posted by dinasrt
are you able to still drive? If so, the good news is that you'll fit in it a lot better! (thought you could use the chuckle) very sorry to hear about your plight; hang in there. Very honored to have followed along with you as well, here on this great forum.
unfortunately my license has been revoked and to be honest even though i can physically still drive, i don't think that i should be. I would feel horrible if i were responsable for hurting someone else. Actually i fit in fine before, i am or was a muscular 5 ft 10 at 263 now i'm 180. My plan was to ask the little sister of a lifelong friend if she would drive my car and me to car shows, she's single and competent and an all-around good egg, nice personality, whom i've known for 58 years. It doesn't hurt that she's quite attractive, actually dated joe namath for a while!. Thanks again for the leads.
 
Reply
Old Jul 22, 2019 | 09:01 PM
  #5 (permalink)  
DTMenace's Avatar
Senior Member
Joined: Apr 2006
Posts: 2,509
Likes: 205
From: West Chester, PA.
Default Re: Halfshaft

Originally Posted by JEFASOLD
unfortunately my license has been revoked and to be honest even though i can physically still drive, i don't think that i should be. I would feel horrible if i were responsable for hurting someone else. Actually i fit in fine before, i am or was a muscular 5 ft 10 at 263 now i'm 180. My plan was to ask the little sister of a lifelong friend if she would drive my car and me to car shows, she's single and competent and an all-around good egg, nice personality, whom i've known for 58 years. It doesn't hurt that she's quite attractive, actually dated joe namath for a while!. Thanks again for the leads.
Jim
If I lived closer to you, I surely would help you out with the repairs to your SRT6 since we have a few things in common. It was a pleasure meeting you at the Carlisle event a few years ago discussing our SRT6's.
I wish you the best in the future my friend.....
Regards,
Dennis
DTMenace
 
Reply
Old Jul 22, 2019 | 09:29 PM
  #6 (permalink)  
amx1397's Avatar
Senior Member
Joined: Apr 2008
Posts: 6,703
Likes: 435
From: Indialantic Fl./blairsville Ga
Default Re: Halfshaft

Jim I have an axle ,, sorry i forgot where u live I am in south Florida right now but will be in central Florida next week, going to Gainesville race way on Aug 9 and then and close to the middle of Aug. i will be going to North east Georgia ( Blairsville) this axle i was running in my V8 so i know it is good and strong.if u are anywhere near me i can delver it.

give me a call 954 336 3405 jim
 
Reply
Old Jul 23, 2019 | 07:08 AM
  #7 (permalink)  
JEFASOLD's Avatar
Thread Starter
|
Senior Member
Joined: Aug 2012
Posts: 1,709
Likes: 10
Default Re: Halfshaft

Originally Posted by DTMenace
Jim
If I lived closer to you, I surely would help you out with the repairs to your SRT6 since we have a few things in common. It was a pleasure meeting you at the Carlisle event a few years ago discussing our SRT6's.
I wish you the best in the future my friend.....
Regards,
Dennis
DTMenace
Thanks for the well wishes Dennis. I enjoyed our meeting as well.
I so very much would like to come to Carlisle again.
 
Reply
Old Jul 23, 2019 | 07:15 AM
  #8 (permalink)  
JEFASOLD's Avatar
Thread Starter
|
Senior Member
Joined: Aug 2012
Posts: 1,709
Likes: 10
Default Re: Halfshaft

Originally Posted by DTMenace
Jim
If I lived closer to you, I surely would help you out with the repairs to your SRT6 since we have a few things in common. It was a pleasure meeting you at the Carlisle event a few years ago discussing our SRT6's.
I wish you the best in the future my friend.....
Regards,
Dennis
DTMenace
I ,too, enjoyed that meeting. I would love to attend Carlisle again. Thanks for the well wishes Dennis, they are much appreciated.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
boostmonkey
Parts/Accessories for sale - Archive
2
Jan 31, 2012 01:18 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


All times are GMT -4. The time now is 01:59 AM.