Here's what I'm trying to find in this exact shape. It's pretty much for an intake which will allow air to be funneled into the manifold from both sides, a lot like our airbox but hopefully less restrictive since it'll be using 3" pipe. If I need to get 2 silicon elbows and fabricate it somehow I'll do that if I have to.

To direct airflow down I would have to put in a divider possibly with some inlets or holes so I can allow the air to be sucked freely but still have some direction into the intake manifold so the air isn't fighting for space .



If you know what this shape is called, I would assume "Y" then let me know I'm coming up empty on the net.

 

I couldn't find one, that is why I went with a single 3" tube.

 

I believe that Speed Innovation used an SL55 Intake Y-Splitter for SRT SIX's upgrade.

Bolt on part... if I recall correctly... about $80.

 

Yeah, that's exactly it, found this on a Cardomain C32 but a quick Google search comes up with nothing for purchasing.

 

Looks like it might be 3" combined. One 3" tube should be more than it can take in.
The mass is slightly smaller than 3" unless you go with a bigger one 3" should be plenty.

 

That's a mercedes "Y" part shown in the picture, but I wonder what that stainless line is for? Maybe water or alcohol injection.

 

It clearly says NOS on the blue Y A-N fitting.

 

its not that clear, but i see it now.