heres the deal im going to be pulling my motor to paint the block and polish some bits and bobs as well as doing some upgrades, my tvt intake should be here within the next couple days and it requires me removing the intake and engine cover (that makes me happy i hate the big chunky black plastic) so i was trying to figure out what else i could do at the same time im ordering the evo sport underdrive pulleys and im sending my alternator to typhoon to have it rewound so itll kick out around 250 amps i was wondering if anyone found a viable not cheap but decent set of headers to clean things up in there or if anyone has figured out the fuel injector issue cause im going to have my true dual conversion done on my magnaflows soon plus the intake possible headers injectors and underdrive pulleys then im sending the ecu away for a retune with all the parts accounted for at the same time so that i might get an actual hp increase. my other question is has anyone found an msd or other company ignition system that will work or am i stuck with stock? maybe upgraded coils? of and i will need some red plug wires as well any direction would be a great help! thnxs guys!

 

Take and post a photograph of the empy engine bay from the top and bottom plz.

 

itll probably be a month before i get started man im trying to get all my parts together first.

 

Irwin,
Check out these plug wires.

http://www.magnecor.com/magnecor1/main.htm

This could be your source for headers.

http://www.letmotorsports.com/chy.as...6&category=all

Don't forget, you have to have it all back together by the first weekend in April. Good luck.

 

hmmmm so 200 for the wires 950 for the headers... but no specs for the headers at all and are they ceramic coated or is that just paint??? but still i think they are the only ones available... thanks for the info and dont worry my dead line is 1 week before that lol. i just need to find out about the injectors now!