ME 2.8 / 2.8.1 Programming
It seems like you guys have been kinda screwed by the DC management for perfomance and maintenance mods of the SRT an NA Crossfire...
When I worked for GM, we were told that certain AM performance manufacturers could have full access to our products prior to general sales... This was not the case with DC... It was because of the counterparts in Germany...
So, if the Crossfire community has a desire to access the software for performance upgrades on the ME 2.8 or 2.8.1, I can help... Unfortunately I cannot negotiate group-buys or anything of the sort... We are restricted to the corporate pricing structure...
I can tell you that the AMG engines can achieve 35% HP increase with certain modifications from our company...
When I worked for GM, we were told that certain AM performance manufacturers could have full access to our products prior to general sales... This was not the case with DC... It was because of the counterparts in Germany...
So, if the Crossfire community has a desire to access the software for performance upgrades on the ME 2.8 or 2.8.1, I can help... Unfortunately I cannot negotiate group-buys or anything of the sort... We are restricted to the corporate pricing structure...
I can tell you that the AMG engines can achieve 35% HP increase with certain modifications from our company...
Please elaborate on the packages you have available and the pricing.
And for us dummies that have WAY to many part numbers and model numbers in our heads, please explain what the ME 2.8 or 2.8.1 is...
And for us dummies that have WAY to many part numbers and model numbers in our heads, please explain what the ME 2.8 or 2.8.1 is...
I believe 2.8 is NA and 2.8.1 is the ecu for pressurized engines like your srt6
Anychance you guys at Bosch USA can provide us with a v8 ecu, for those of us that want to do this engine swap?
Anychance you guys at Bosch USA can provide us with a v8 ecu, for those of us that want to do this engine swap?
I want in as well WHERE CAN I SEND THE CHECK... Can you do a Bosch tune with after market parts like pulleys, exhaust, and intake ?
I'm going to make a point about this issue somewhere on the forum and then you'll all understand... I hope...
I'm not falling for it....??????
I'm going to make a point about this issue somewhere on the forum and then you'll all understand... I hope...
I'm not falling for it....??????
Last edited by jonnyangel04; Dec 27, 2007 at 02:35 PM.
Originally Posted by jonnyangel04
I want in as well WHERE CAN I SEND THE CHECK... Can you do a Bosch tune with after market parts like pulleys, exhaust, and intake ?
I'm going to make a point about this issue somewhere on the forum and then you'll all understand... I hope...
I'm not falling for it....??????
I'm going to make a point about this issue somewhere on the forum and then you'll all understand... I hope...
I'm not falling for it....??????
BOSCH-USA: 4 posts
MOTEC: 1 post
HAULINAZZ: 3 posts


What more can I say??????????????
MMZ and Bosch I realize you guys are trying to prove a point but don't use stuff that is real that could possibly be searched...http://www.autoequipment.ru/Files/List_21.pdf anyone who now searches bosh or ECU or 2.8 will come up with this and hopefully not be fooled.
Ok Bosch and Motec, you both stuck your heads in here, now what do you have to offer? Don't just say hi, we can help you out, and then leave. That's very uncool!! What are you two offering for ecu reprograming? You have our attention.
Originally Posted by The Toy
Ok Bosch and Motec, you both stuck your heads in here, now what do you have to offer? Don't just say hi, we can help you out, and then leave. That's very uncool!! What are you two offering for ecu reprograming? You have our attention.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



