Mopar Performance Cat Back System?
First time I saw this. Listing doesn't say specific for NA or SRT.
Chrysler Crossfire Mopar Perf Cat-Back Exhaust System - eBay (item 120656842764 end time Jan-04-11 17:34:54 PST)
Chrysler Crossfire Mopar Perf Cat-Back Exhaust System - eBay (item 120656842764 end time Jan-04-11 17:34:54 PST)
Last edited by James1549; Dec 6, 2010 at 07:02 PM.
Max, it's not MagnaFlow. This system has two mufflers like Borla.
If it is made by Borla, with the same specs, then it is a good deal.
If it is made by Borla, with the same specs, then it is a good deal.
Originally Posted by James1549
Max, it's not MagnaFlow. This system has two mufflers like Borla.
If it is made by Borla, with the same specs, then it is a good deal.
If it is made by Borla, with the same specs, then it is a good deal.
The picture is for an SRT model.
Yes, That system is made by Borla. In fact, nearly all of the "Mopar" catbacks in the past 15 years have been made by Borla. It is a great sounding system for N/A owners! Consists of a resonator and the muffler similar to the SRT's exhaust set up. Sadly it's too small for SRT's according to Borla, The pipes are sized for the N/A. It would be a restriction on an SRT.
ya, that is the borla system for the n/a's, it lists at $894, chrysler has 1 more in existance at their warehouse. we could do a little better than list but no where near what the ebay auction is for.
My system arrived today. Now to wait for a warmer day. Nice setup for $299. Mopar on the mufflers, Borla on the tips. The Postwomen wasn't very excited about carrying the package to the door.





Now to tape off the tips and give it a couple good coats of high temp black on the rear muffler so it will be ready for spring.





Now to tape off the tips and give it a couple good coats of high temp black on the rear muffler so it will be ready for spring.
Last edited by James1549; Dec 13, 2010 at 02:09 PM.
I Have Been Running This On My Na For Last Four Years But Under The Borla Name , Can Say It Dose Have Good Sound Not as Loud Has The Magna Flow , I Did Take The Resnator Of This Last Year And Dose Sound Better More What I Like , Nice Buy James ! Hope You Like The It Sound !
Originally Posted by NeedsWings
ya, that is the borla system for the n/a's, it lists at $894, chrysler has 1 more in existance at their warehouse. we could do a little better than list but no where near what the ebay auction is for.
Warmer temperatures are here, and while you guys are having fun at the Dragon, I am here laying under my car putting on my new exhaust system. Bolted up extremely easy being two pieces.
Good news, bad news. The sound taking off from a light is just right, although I expected a bit louder. But once over 35 mph, the noise is gone, sounds as quiet as the stock system. I wanted to hear it some, but not as loud as my Magnaflow.
Ray I will have to listen to yours next time we are together to hear it without the resinator. For now I will run it as is.
Pictures coming next time I get under it to paint the system flat black.
James
Good news, bad news. The sound taking off from a light is just right, although I expected a bit louder. But once over 35 mph, the noise is gone, sounds as quiet as the stock system. I wanted to hear it some, but not as loud as my Magnaflow.
Ray I will have to listen to yours next time we are together to hear it without the resinator. For now I will run it as is.
Pictures coming next time I get under it to paint the system flat black.
James
James,
I was interested to find out how it would sound if you JUST ran it with the first muffler and then straight piped to the outlet. Thoughts?
I was interested to find out how it would sound if you JUST ran it with the first muffler and then straight piped to the outlet. Thoughts?
Originally Posted by TomStratRT
James,
I was interested to find out how it would sound if you JUST ran it with the first muffler and then straight piped to the outlet. Thoughts?
I was interested to find out how it would sound if you JUST ran it with the first muffler and then straight piped to the outlet. Thoughts?
Because it is two pieces, it would be very easy for my exhaust guy to do that. I will let it go for now and see how it turns out as I drive it more.
Thread
Thread Starter
Forum
Replies
Last Post
gtjl
Troubleshooting & Technical Questions & Modifications
17
Jul 22, 2015 06:28 PM
cx24724
Troubleshooting & Technical Questions & Modifications
2
Jul 12, 2015 11:57 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



