im searching for someone close to the long island area to help me out. i bought a killer chiller from ebay and shipped it to bruce at TUNING TECHNOLOGY MOTORSPORTS. he needs a crossfire or slk to mock up the k/c and measure for new lines. this would allow folks to buy a k/c as a kit or just the unit from kincaid and have bruce build the lines for a plug and play install.
nothing will be changed on your car its purely for mockup. if your willing to help move this along let me know

 

I'd be willing to give the volunteer some cash if it comes down to that. Personally I believe the KC will get the XF's (and ugly SLK's) into the mid to low 11's without nitrous.

 

I wish I could help, but my Xfire is still in Florida.

I was gonna bring it up for the Summer, but business got in the way, so it may not make to NY this year.

It's a shame, cause Moto is less than 30 minutes from me.

Someone from the Island shud be able to lend a hand...

 

Steve, the only two SRTs I can think of on Long Island are AZN440 (Ron) or acrispy1 (Tony).

I would PM Ron first, he was at the shop with me when I dropped off and picked up the car so he already knows Bruce. He may be willing to lend a hand...I am not sure if he would want the KC on his car though, so if Bruce has to cut into any AC lines then he might be hesitant.

 

no cutting involved. just finding the proper place to mount it and then measuring for lines after. the k/c will be installed on my 32 he just needs to see were all the lines will go and how long they need to be. if you have his # how about call and see if he's interested